Gun info:
Valve: Springloaded ball-valve
Barrel length: 28 inches / 0.7m
Chamber: 30 inches of 3/4 inch steel
Operating pressure: 350 psi
Loading mechanism: Muzzle loader
Videos:
Me shooting at 67 yards. You can hear the marble going through the backstop. I had to aim a foot to the right because my barrel is bent to the side XD.
My brother and me shooting at jugs of water.
Happy spudding!
50 caliber 350psi air musket
-
bravootome
- Specialist 3
- Posts: 334
- Joined: Mon Oct 14, 2013 11:11 am
- Has thanked: 1 time
- Been thanked: 2 times
It is a simple design but it sounds good . It's probably for fun with friends . More pictures with the gun.....
come undone
Thanks for the comment. I don't have any pictures of the whole gun but you can see it in full in the video. Made a stock for it but it broke :c. I tried to take as many damage pictures as possible though. Here's some more, taken from my phone.
- Attachments
-
- Shooting position to target
- 10628594_10202558529872628_8537923272918427949_n.jpg (29.63 KiB) Viewed 2884 times
-
- View from target
-
- Hole from 67 yard shot
- 10411131_10202558536672798_1109416771215940899_n.jpg (16.12 KiB) Viewed 2884 times
-
- Better view of table
- 10579967_10202558519472368_1944059257811956652_n.jpg (22.94 KiB) Viewed 2884 times
-
- I like holes.
- 10649833_10202558536112784_5652913964027685946_n.jpg (15.24 KiB) Viewed 2884 times
-
- Coffee can full of water after being shot. Marble was stopped at other end, leaving a dent. Found powdered marble in the bottom.
- 10626878_10202558539352865_7895134111126399762_n.jpg (27.48 KiB) Viewed 2884 times
-
bravootome
- Specialist 3
- Posts: 334
- Joined: Mon Oct 14, 2013 11:11 am
- Has thanked: 1 time
- Been thanked: 2 times
3 years ago i've made something similar after seeing some youtube videos, just to see if it is really posible. And it was !
come undone