Well that's stupid for three reasons.
1) Joel stopped making them while he goes to Iraq
2) BattleMonkey lives in New Zealand
3) Still doesn't solve the problem of expensive piping.
large cannon
-
ShowNoMercy
- Sergeant
- Posts: 1094
- Joined: Mon Mar 19, 2007 8:08 am
- Location: Jersey Bitches!
Ok he can buy a used one, and have it shipped along with some other assorted pieces to wherever he wants.
Jesus saves, no need to pray
The gates of pearl have turned to gold
It seems you've lost your way
The gates of pearl have turned to gold
It seems you've lost your way
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
It'd be cheaper buying it in NZ with the shipping rates, Think logically ShowNoMercy, use your head, shipping a 6' section of 4" pipe isn't the smartest idea, nor shipping a used supah valve when he still needs to buy a chamber and other fittings.
-
battlemonkey
- Specialist
- Posts: 137
- Joined: Sat Sep 22, 2007 3:42 pm
hmmmmmmmmmmmmmmm
the website that i got the pic off said that it had about a 1200ft range with a pvc dart. wopuld this be true because if so them my school is in range
the website that i got the pic off said that it had about a 1200ft range with a pvc dart. wopuld this be true because if so them my school is in range
-
iknowmy3tables
- Staff Sergeant
- Posts: 1596
- Joined: Fri Dec 15, 2006 3:57 pm
- Location: maryland
- Has thanked: 3 times
- Been thanked: 9 times
we all highly doubt it,
and first off you can cut the price buy using a normal DWV 3" end cap, but wait I need to use all rated fittings right no the piston is supported on both sides, and the vacuum of the barrel is mainly applying force to the rubber sheet.
you may also use various ghetto techniques like instead of the normal 4" brushing you can use a 3" to barrel size" glue coupler on brushing, then glue that in the 4" pipe should fit right in
if you are even too cheap to buy a valve to actuate it you can fire it by removing the quick connect
and first off you can cut the price buy using a normal DWV 3" end cap, but wait I need to use all rated fittings right no the piston is supported on both sides, and the vacuum of the barrel is mainly applying force to the rubber sheet.
you may also use various ghetto techniques like instead of the normal 4" brushing you can use a 3" to barrel size" glue coupler on brushing, then glue that in the 4" pipe should fit right in
if you are even too cheap to buy a valve to actuate it you can fire it by removing the quick connect
-
battlemonkey
- Specialist
- Posts: 137
- Joined: Sat Sep 22, 2007 3:42 pm
well may have to abandon project. got taken out racing at mt wellington and my bike needs a new fairing and brake handle. my need to import parts from japan so i could very well be about to be broke. 
howver i will scrounge around at the opencast and if i can find enough of what i need will continue
howver i will scrounge around at the opencast and if i can find enough of what i need will continue