GGDT Valve Settings?

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Post Reply
spudkilla224
Private 4
Private 4
Posts: 65
Joined: Wed Mar 19, 2008 8:04 pm

Sun Oct 25, 2009 2:35 pm

Hello everyone, I was wondering if I would use the "generic valve" input for a 3/4 Orbit Water Master Sprinkler valve that is modded with a 1/4" blowgun with no dead space. Cause the sprinkler valve is modified with a blowgun attached by a nipple right to the sprinkler valve. So what would i put for a valve seat diameter? and the dead volume, flow eff., and dwell time?

Any help would be appreciated! :D
Top
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1924
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 8 times
Been thanked: 44 times

Donating Members

Sun Oct 25, 2009 3:18 pm

Sure, you could do that. But considering that the Orbit Water Master is explicetly discussed on the GGDT webpage, I'd think you a fool should you choose to use "generic valve."

Moral of the story: RTFM.
Simulation geek (GGDT / HGDT) and designer of Vera.
Top
Post Reply

Return to “Pneumatic Cannons”