Looking for a hammer type mechanism

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
FighterAce
Specialist 2
Specialist 2
Croatia
Posts: 295
Joined: Fri Oct 23, 2009 1:28 pm
Location: Croatia/Zagreb
Has thanked: 1 time
Been thanked: 4 times
Contact:

Fri Jun 29, 2012 12:14 pm

I used to have a comfy 80mm of space behind my schrader pilot valve so fitting a striker mechanism was not a problem... but after a redesign and replacement of the fittings with PN50 rated stuff I was left with only 14mm behind the piston stem.

Now I need some sort of mechanism that will fit in this space...

Image

The rifle itself will be a bulpup piston rifle so if you look at the pic, the trigger would be somewhere far to the left and my shoulder behind about 5mm of wood to the right. Above the pilot area is a cheek rest adjustment knob so theres no room there and below those 80mm is a pressure gauge.

At 50bar the push button valve requires about 120N of force to open.
I guess "hammer mechanism" is not really a valid name because I want the hammer to just push on the valve stem, not strike it at some velocity. This cuts down on noise, vibration and it shouldn't deform the aluminum valve stem after just a couple of shots.

Any ideas?

EDIT

I forgot to mention its supposed to be a spring driven mech... thats why I'm having trouble with it. A direct link between the trigger and some lever would be a lot simpler but I'm going for consistency on this project.
“The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine.”
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Sat Jun 30, 2012 10:57 am

How about a hydraulic system? Here's acrude iteration of the idea.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
FighterAce
Specialist 2
Specialist 2
Croatia
Posts: 295
Joined: Fri Oct 23, 2009 1:28 pm
Location: Croatia/Zagreb
Has thanked: 1 time
Been thanked: 4 times
Contact:

Sat Jun 30, 2012 11:29 am

That would be almost the same as direct link method... depending on the speed of the trigger pull the valve opening time would vary and this is exactly what I'm trying to avoid.

It doesn't really have an advantage in my application since I have a clear path to the trigger guard.
“The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine.”
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Sat Jun 30, 2012 11:41 am

You don't have enough room for a striker and any amount of travel behind the valve.

Maybe a lever behind the valve and an inline strker below the valve hitting said lever? Light spring on the lever to maintain it's position....
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
FighterAce
Specialist 2
Specialist 2
Croatia
Posts: 295
Joined: Fri Oct 23, 2009 1:28 pm
Location: Croatia/Zagreb
Has thanked: 1 time
Been thanked: 4 times
Contact:

Sat Jun 30, 2012 12:16 pm

Gippeto wrote:Maybe a lever behind the valve and an inline strker below the valve hitting said lever?


Or have the main spring attached to the lever itself and have a sear hold it in place... but such a sear would need a trigger press coming from the back. Thats something I can't pull off in a bulpup with any of the mechanisms I'm familiar with.
“The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine.”
Goats spudz
Specialist 4
Specialist 4
Posts: 458
Joined: Tue Aug 02, 2011 12:31 pm
Contact:

Sat Jun 30, 2012 3:18 pm

Like this quick 2 min job
Attachments
Something like that (sorry i made it in 2 minutes)
Something like that (sorry i made it in 2 minutes)
trigger.jpg (14.15 KiB) Viewed 3948 times
Where's my Chuck key?
User avatar
FighterAce
Specialist 2
Specialist 2
Croatia
Posts: 295
Joined: Fri Oct 23, 2009 1:28 pm
Location: Croatia/Zagreb
Has thanked: 1 time
Been thanked: 4 times
Contact:

Sat Jun 30, 2012 4:01 pm

If the trigger was facing that way I wouldn't be asking for help :D

I think I described it well enough... but heres some perspective on my dimension drawing anyways.

Image


And just for the heck of it... this is what I meant in my earlier post...

Image

Keeping it simple :wink:
“The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine.”
Goats spudz
Specialist 4
Specialist 4
Posts: 458
Joined: Tue Aug 02, 2011 12:31 pm
Contact:

Sat Jun 30, 2012 4:28 pm

FighterAce wrote:Keeping it simple :wink:
Yes but the problem is when you press the trigger, unable to reset sear, not enough mass to open the valve, if spring was strong enough you would just get 1 big hiss of air,
Attachments
Your looking for this then
Your looking for this then
triggerv2.jpg (15.44 KiB) Viewed 3927 times
Last edited by Goats spudz on Sat Jun 30, 2012 4:48 pm, edited 1 time in total.
Where's my Chuck key?
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Sat Jun 30, 2012 4:47 pm

FighterAce wrote:If the trigger was facing that way I wouldn't be asking for help :D
Personally I find that statement truly ignorant. Gives me the impression that you have a bad attitude. :roll:


Alrighty then...have fun.
Last edited by Gippeto on Sun Jul 01, 2012 1:36 am, edited 1 time in total.
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
FighterAce
Specialist 2
Specialist 2
Croatia
Posts: 295
Joined: Fri Oct 23, 2009 1:28 pm
Location: Croatia/Zagreb
Has thanked: 1 time
Been thanked: 4 times
Contact:

Sat Jun 30, 2012 7:21 pm

Goats spudz wrote:Yes but the problem is when you press the trigger, unable to reset sear, not enough mass to open the valve, if spring was strong enough you would just get 1 big hiss of air,
Well... the sear could be reset with a spring and the whole mechanism with a reset rod mounted somewhere on the lever. Mass is not an issue if the spring would act directly on the lever - maintaining my "no velocity" requirement.

1 hiss of air is all I'm looking for and a manual reset is not a problem :wink:
Gippeto wrote: Personally I find that statement truly ignorant. Gives me the impression that you have a bad attitude. :roll:
I'll take ignorant as a fact rather than an insult since I'm genuinely unaware of ways to redirect forces 180° from its origin... but bad attitude? For me thats posting in a non constructive, insultive manner.

Don't get me wrong... I'm thankful for the replies but please stick to the topic and its guidelines.
Gippeto wrote: Clear as mud? :roll:
Indeed :roll:
“The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine.”
User avatar
Crna Legija
First Sergeant 2
First Sergeant 2
Posts: 2333
Joined: Sun Jul 20, 2008 5:14 am
Location: australia

Sat Jun 30, 2012 10:43 pm

FighterAce wrote: 1 hiss of air is all I'm looking for and a manual reset is not a problem :wink:
So do you want semi or just one shot?
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson

Add me on ps3: wannafuk, 8/11/11 cant wait
User avatar
FighterAce
Specialist 2
Specialist 2
Croatia
Posts: 295
Joined: Fri Oct 23, 2009 1:28 pm
Location: Croatia/Zagreb
Has thanked: 1 time
Been thanked: 4 times
Contact:

Sun Jul 01, 2012 4:35 am

I didn't even think of that... no I'm not trying to go semi.

This is what I managed to come up with...

Image

Pivot points are red and the reset bar is yellow.

Its still got a major problem of high leverage ratio which means I need a strong spring and the trigger pull is hard to adjust due to lack of space... I don't think I've got it yet :?
“The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine.”
User avatar
Crna Legija
First Sergeant 2
First Sergeant 2
Posts: 2333
Joined: Sun Jul 20, 2008 5:14 am
Location: australia

Sun Jul 01, 2012 6:11 am

why not just open it with the rod movement no spring no need to a respect bar.
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson

Add me on ps3: wannafuk, 8/11/11 cant wait
User avatar
FighterAce
Specialist 2
Specialist 2
Croatia
Posts: 295
Joined: Fri Oct 23, 2009 1:28 pm
Location: Croatia/Zagreb
Has thanked: 1 time
Been thanked: 4 times
Contact:

Sun Jul 01, 2012 6:43 am

Crna Legija wrote:why not just open it with the rod movement no spring no need to a respect bar.
I already answered you...
FighterAce wrote: I forgot to mention its supposed to be a spring driven mech... thats why I'm having trouble with it. A direct link between the trigger and some lever would be a lot simpler but I'm going for consistency on this project.
FighterAce wrote:That would be almost the same as direct link method... depending on the speed of the trigger pull the valve opening time would vary and this is exactly what I'm trying to avoid.
“The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine.”
Post Reply