SpudFiles

Posted: **Tue Sep 11, 2012 7:35 am**

Here is my new gun

It´s a golfball shooting QEV gun that has been taken to 8 bar pressure.

-Chamber: The chamber is a 1,25 liters extinguisher that holds up to 30 bars pressure
-The valves: The primary valve is a homemade qev that is piloted by a smaller qev and a blowgun
-The barrel: The barrel is a pvc pipe that fitts golfballs

Inside pictures of The homemade QEV

The piston

The piston inside the Tee

The barrel side of the QEV

The second QEV, blow gun, barrel and tank fitted to the large qev

Target picture, golfball vs 1 inch board

Posted: **Tue Sep 11, 2012 8:08 am**

Impressive!

I would try to optimise the piston a little, maybe using synthetic spacers instead of metal to save weight, and grinding down the sealing face nut for better flow, but otherwise great job!

Also, you only need one small (1mm dia is enough) equalisation hole...

Posted: **Tue Sep 11, 2012 10:02 am**

That is a compact impressive gun you got there. A all metal barrel sealer. Good work. I like the trigger too!! Nice job. I wouldnt change a thing!! 8) 8) 8)

Posted: **Wed Sep 12, 2012 8:53 am**

jackssmirkingrevenge wrote:Impressive!

I would try to optimise the piston a little, maybe using synthetic spacers instead of metal to save weight, and grinding down the sealing face nut for better flow, but otherwise great job!

Also, you only need one small (1mm dia is enough) equalisation hole...

Thanks for the tips:) I have been thinking on making the front bolt on the piston smaller but I wanted to try the gun first to see if it worked and it did:)

Posted: **Sat Sep 15, 2012 1:35 pm**

me gusta

nice gun man

SpudFiles

Golfball gun

Golfball gun