SpudFiles

So im gonna build a pcp airgun. At least a 2 shot. And i need a simple valve for the gun, any tutorials? and the whole gun, i need info on that too. cus i dont know the valve thingies..... and stuff

If you cant make out the words on the image, they are: piston,chamber, 90 degree connector, another connector, INSERT VALVE DIAGRAM HERE, and barrel . And i listed the words counterclockwise.

Do a search for pcp...go through the threads on the first page.

Nothing worthwhile comes without a cost....the cost here is your time.

but ive found nothing or then im just blind..

iloveairguns wrote:...then im just blind..

Read the actual threads...not just the titles.

Start here: http://www.spudfiles.com/forums/how-to- ... 24038.html

The answers to your questions have already been posted at length on the forum, a bit of patience to absorb as much information as you can is all you need

i have been searching for several days now looking for alternative cheap valves, i think i found something... just not sure if they can handle the pressure... also i have been looking at building smaller hand held micro size shooters.. anyway check these out under the heading "Pneumatic Air Valves and micro Pneumatic Air Valves". let me know what you think!


http://www.ebay.com/sch/i.html?_trksid= ... &_from=R40[/img]

You could try something along the lines if this:

spudly1010 wrote:i have been searching for several days now looking for alternative cheap valves, i think i found something... just not sure if they can handle the pressure... also i have been looking at building smaller hand held micro size shooters.. anyway check these out under the heading "Pneumatic Air Valves and micro Pneumatic Air Valves". let me know what you think!

Push button valves generally are ideal for pilot valves but not as main valves unless you're shooting very small calibres ( <0.177" ).

[img]https://twimg0-a.akamaihd.net/profile_images/3102196860/f64c8913d55db24cdc80339bff80ef40_normal.jpeg[/img] wrote:You could try something along the lines if this

i would rather build the valve(s?) myself

And btw, auxiliary, i dont really appreciate your contribution, im looking for real answers.. really juvenile.

if you didnt notice the poll check it by the way

iloveairguns wrote:And btw, auxiliary, i dont really appreciate your contribution, im looking for real answers.. really juvenile.

It was merely a response to your juvenile question

i would rather build the valve(s?) myself

If you don't have the wherewithal to sift through the forum to find basic information, I would strongly recommend you start with standard off-the-shelf parts before attempting to build your own.

''It was merely a response to your juvenile question''

JSR, what the **** are you coming to say that my help request is a juvenile question? Totally not cool man..

Hey i will also need a regulator, any1 know how to make a regulator??