Page 1 of 1
pneumatic electric potatoe cannon help
Posted: Wed Sep 27, 2006 8:32 pm
by xdeah
hi i made a potatoe cannon with an electric valve and it has a leek around where the barrel meets the valve i followed instructions exactly can anyone help
Posted: Wed Sep 27, 2006 8:42 pm
by noname
Do you know exactly where the leak is?
If you don't:
Put it in a bathtub full of water when pressurized, bubbles will come from the hole.
Then seal it with epoxy or sealant.
If you do:
Seal it with epoxy or sealant.
Posted: Wed Sep 27, 2006 9:42 pm
by saladtossser
did u use teflon tape first? dont jump to glue without trying teflon tape
Posted: Wed Sep 27, 2006 10:03 pm
by mark.f
saladtosser...
<img src="
http://i10.photobucket.com/albums/a123/ ... 1q/wtf.png">
What the hell is that?!?!? Where I come from, we don't roll that way.
Posted: Wed Sep 27, 2006 10:56 pm
by frankrede
Saladtosser what is your orientation?
Hopefully not all spudgunners arent all straight.
Posted: Wed Sep 27, 2006 11:01 pm
by BC Pneumatics
Way to stay on topic guys.
Is the valve on the right way? (Look for arrows molded into the body, they should point toward the barrel)
