P1070488 by Terry Griffiths, on Flickr
https://www.flickr.com/photos/154623046 ... ed-public/
Collecting bits for a while, finally got round to putting them together. Mostly all used parts.
Spec:
8ltr high pressure sprayer bottle for combustion chamber(inc bends likely 10ltr)
2m long 44mm bore aluminum barrel
BBQ sparker ignition
12v Air bed blower to vent chamber
12v drill battery powers blower
Metered propane via regulator
Stainless exhaust pipe bends
Barrel opens via stainless sanitary flange fitting/clamp
Laser dot sight
Just made it up as i went along using the bits i had, no fancy calculations etc. The combo of large combustion chamber and long barrel seem to have worked. It has crazy power and chucks spuds through finish grade 3/4 plywood and golf balls clean through oil drum without it even moving See damage pics
P1070487 by Terry Griffiths, on Flickr
P1070486 by Terry Griffiths, on Flickr
P1070485 by Terry Griffiths, on Flickr
P1070484 by Terry Griffiths, on Flickr
P1070483 by Terry Griffiths, on Flickr
P1070482 by Terry Griffiths, on Flickr
P1070481 by Terry Griffiths, on Flickr
P1070480 by Terry Griffiths, on Flickr
P1070490 by Terry Griffiths, on Flickr
Monster Sprayer Combustion Cannon
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
Big is good, impressive build! Integral blower is a nice touch.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Thanks. I didn't want to compromise the tank by cutting a big hole in it for an internal fan and vent valve so the blower was what came to mind. It works rely well, run it for a couple of seconds and chamber is all vented. It blows air in to the chamber via the metering pipe and is isolated by means of a second ball valve.
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
I noticed that, smart move!200BAR wrote:isolated by means of a second ball valve
Do you fire it from the hip or is that fancy handle just for transport?
I really love this particular angle by the way
hectmarr wrote:You have to make many weapons, because this field is long and short life
- mark.f
- Sergeant Major 4
- Posts: 3628
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 52 times
- Been thanked: 53 times
- Contact:
If you can't fit a fan in it, it could use some "chamber change". It's just random objects inside the chamber you can shake up before firing to mix the fuel and air. The over/under design lends itself well to such things (because they don't fly out that easily).
Good job!
Thanks. Seems to fire every time as long as the pressure in the meter pipe is 35psi and gives consistent power shots. I guess the swoosh of gas out of the mete pipe into the chamber is enough to mix it up. I might try some "chamber change" to see if it makes any difference in performance. I will chrony it when i get the time.
@ JSM- I tried a few shots form the hip and it works good and feel pretty cool toting it like a pirate
@ JSM- I tried a few shots form the hip and it works good and feel pretty cool toting it like a pirate
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
Your appreciation is now the thread thumbnailmark.f wrote:I, too, like the blower system.
ARRRRRRRR!!!!200BAR wrote:I tried a few shots form the hip and it works good and feel pretty cool toting it like a pirate
hectmarr wrote:You have to make many weapons, because this field is long and short life
- farcticox1
- Sergeant
- Posts: 1078
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 68 times
- Been thanked: 94 times
Your appreciation is now the thread thumbnail
How do I do that
How do I do that
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
If I remember well you can only select thumbnails for the showcase section.farcticox1 wrote:How do I do that
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Specialist 2
- Posts: 222
- Joined: Wed Apr 12, 2017 5:30 am
Wow mind blown. 8)
That is one wicked cannon you have there!
EDIT-Looks very accurate also. 8)
Love it well done!
That is one wicked cannon you have there!
EDIT-Looks very accurate also. 8)
Love it well done!