So, I need to humble myself a bit to post this, but I figured id get your opinions. I realized a while ago that the aluminum pipe and tube I used for my venom 2x hybrid was NOT seamless! Oops? Yeah, id say. The website I bought it from at the time said all their tube and pipe was seamless. That was a severe LIE, as the ASTM spec for the tube they sell is indeed structural and not seamless. The aluminum is split and flows around the die when its is extruded, and rejoined in a pressure and heating chamber and welded back together to form a hard to see and very smooth seam or seams, where as seamless is extruded around a special die resulting in a single, non seamed piece.
The seams on properly made aluminum tube and pipe are not visible to the eye, so it looked good to me. Upon further research I realized that there is indeed a seamless variant for "reliable" high pressure use.
Anyway, the question is, would you still use an aluminum 2x hybrid if the tube and pipe was structural rather than seamless? 2X pressure isn't THAT much higher than 1X and many people use DWV plastic for 1X without issue, so maybe it will continue to be fine. What do you think?
DWV-Like error in hybrid construction?
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
Its hard to say when we don't know the size... Like diameter, wall thickness, and stuff. I'd probably say yes though.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- Moonbogg
- Staff Sergeant 3
- Posts: 1731
- Joined: Mon Oct 13, 2008 10:20 pm
- Location: SoCal
- Has thanked: 153 times
- Been thanked: 100 times
If you click "venom" in my sig, you will see a drawings of the cannon. Chamber is 4 1/2" OD x 3/16" wall. Barrel is 1.87ID x .065 wall.Gun Freak wrote:Its hard to say when we don't know the size... Like diameter, wall thickness, and stuff. I'd probably say yes though.
6061-T6
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 8:32 pm, edited 1 time in total.
- jrrdw
- Moderator
- Posts: 6571
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
Can you get the data sheets for the pipe you have? If you bought it from/in the USA and it's labeled for sale as "structural" the seller has to maintain and provide them upon request of the customer. You can get the ratings from the data sheets.
To answer your question, it really depends on the data and what the parts look like after inspection after use. Clean the pipe up and look for stress cracks, chipping/pitting around the edges of the exhaust port. Check it for 'round' still holding it's shape or getting oblong/oval shaped. Is the pipe growing any tumers/bulging any where etc...
To answer your question, it really depends on the data and what the parts look like after inspection after use. Clean the pipe up and look for stress cracks, chipping/pitting around the edges of the exhaust port. Check it for 'round' still holding it's shape or getting oblong/oval shaped. Is the pipe growing any tumers/bulging any where etc...
- mark.f
- Sergeant Major 4
- Posts: 3627
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 52 times
- Been thanked: 53 times
- Contact:
x2, people have used welded pipe at much higher mixes.SpudBlaster15 wrote:With the dimensions you've provided, you're looking at a burst pressure somewhere over an order of magnitude higher than the maximum adiabatic combustion pressure at 2X, so there's nothing at all to worry about.
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
Galvanized is has a seam and it holds thousands
I would not be worried at all.
I would not be worried at all.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- mobile chernobyl
- Corporal 3
- Posts: 756
- Joined: Sun Dec 03, 2006 11:53 am
- Been thanked: 7 times
I use 3" welded Sch10 in my 10X
This may not hold true for all pipes, but take a look at this document.
This may not hold true for all pipes, but take a look at this document.
- Moonbogg
- Staff Sergeant 3
- Posts: 1731
- Joined: Mon Oct 13, 2008 10:20 pm
- Location: SoCal
- Has thanked: 153 times
- Been thanked: 100 times
Thanks for the feedback. I will continue to use it. Even if it did fail, I couldn't immagine it fragging like PCV. That document uses an 80% value for pressure rating compared to seamless. If that is anything like true for my tube, then the cannon should still have a reasonable safety factor. Don't worry though. If it explodes i'll totally take pics and show you guys.
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
The barrel I use isn't seamless and it's the same wall thickness as yours (IIRC). Although it is steel and not aluminium, it's burst pressure is over 4000PSI, I believe.
You'll remember I used ABS, rated for something like 220PSI, as a barrel at 10x mixes with heavy projectiles. I wouldn't be too worried about using your barrel, even at 10x mixes with heavy projectiles.
You'll remember I used ABS, rated for something like 220PSI, as a barrel at 10x mixes with heavy projectiles. I wouldn't be too worried about using your barrel, even at 10x mixes with heavy projectiles.
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
PVC cartridge at 6x;
[youtube][/youtube]
You'll be fine
[youtube][/youtube]
You'll be fine
hectmarr wrote:You have to make many weapons, because this field is long and short life