SpudFiles

specs:
chamber: 8" of 2" galvanized pipe. "little bigger with all the couplings"
barrel: 18mm copper barrel 6feet long for small marbles.
(defect) barrel2: 1" copper 3feet for big marbles and 100g steel bolts
ignition: primitive camera flash and ignition coil.
union: 1"
burst disk: 16 layers aluminium foil at 4x


i converted my hybrid into a handheld launcher for more enjoyment and i ran onto some small problems.

the trigger and safety switch are on the negative side of the circuit board (galfisk said you got smaller risk to get shocked then) before it was like a nightmare when i was in contact with the gun on ignition i got a BAD shock!
i have accidental leand on the meter of the gun and fired today and i didn't get a shock is it a difference on were you hold the gun?
if not i just try it out tomorrow!

tha clean way to hide away all the damn wires!!!!!!!




i will ask on the images' description!


sorry for bad english and grammar

Great Job!

I'd like to see some damage pics with those 100 gram bolts when it stops raining. I'd say you could take it up to 6x but i'm no expert on hybrids, wait until someone who knows more comes around.

yeah the recoil is going to amaze me!
but i am short for things to shoot at "pneumatic's fault" so if someone can come up with something random for me!

looks like you did a very nice job mate! is this your first combustion/hybrid?

thanks!
it is my first hybrid but i have made a few combustions before

What are you using for your spark plug?

I drilled a hole through a big screw and run a wire in it. the screw is screwed in from the inside so it dosen't pop out. the wire is glued and soldered inplace and the spark jumps from the wire to the screw again!

it looks very neat and clean... can't wait to see some dammage pics

they will get to you:)

Nice work spudfarm, it's always nice to see a new Hybrid
Can't wait for the damage pics, you should be fine operating this to 6x mixes.

thanks nova!
next time it is a piston hybrid allot like _Fnord's

and i think you guys overestimates how hard it is to build a hybrid.
it is not that hard when you first get the system

true, and this is your first hybrid so lets give spudfarm a break, eh'?

Very nice job I havent built a hybrid yet I really need to though if only my dad would let me
Yes it is safe to use it at 5x and 6x but I wouldnt go above 6x with it.

are you planning on making a pneumatic or cumbustion hybrid bigbob12345?

I am I just need my dads approval ill probably get all the pipe and fittings and just use it for a high pressure pnuematic until my dad lets me make one(when my grades go up).