NX14 Airsoft Coaxial

[ALIHISGREAT]

i think this is the guy who posted those "how to make a QEV vids on youtube" ... so he probably uses one of those and yes they do have springs in....

and luckly i can read french! (well almost ) and most of it is guessable, no prizes for knowing what "le ghost sniper" means

[ghostman01]

i think it is two, mainly because you cant understand both of them ! lol

[Sticky_Tape]

Maybe you could copy what you wan't to read into a translator?

[i-will]

the same guy made that little air rifle into a pretty nice bolt-action rifle. all he needs is a magazine system and it'll be fully functional (to my standards). i wouldn't use a soda bottle though. i'd use a burnzomatic propane tank with a vaporizer to insure liquid doesn't reach the coax. they cost like $3 a tank and much cheaper in bulk.

[poppamies]

this is the same spike gun
http://patator.frbb.net/patator-a-air-c ... light=nx14


i made the same gun from this picture and its not coaxial. its operated by QEV and its good looking gun. my version have a 100mm aluminium tank with 300psi pressure and metal blowgun (garden water pistol). it shoot 700m/s (over 2000fps) and 35joules with .30g aluminium bb:s . it really is good gun and accurate wiht 630mm 6.01 airsoft bolt action rifle barrel.

[Ragnarok]

It shoot 700m/s (over 2000fps) and 35joules with .30g aluminium BBs.

Sorry, but no. There is absolutely no way a pneumatic could hit 700 m/s unless it was using at a minimum, helium gas for propellant.

As I don't see any mention of you using helium (and I'm not going to accept "oh, but I forgot" - that's too large a thing to just forget), I'm going to have to file this under my "Articulating from the vicinity of one's posterior" folder.

[covey12]

a clip on this would be no different than a clip on a regular gun, coaxial is probably not the best to do this with because they take just as long to fill up as a hammer valve, which is made for semi-auto

[poppamies]

the my QEV opens very very fast because the piston is very light weight and the nozzle is 10mm so the air flow very quickly.with that and 300psi in big air pack my chrony says 700m/s with metal bbs. so stop saying that it couldnt shoot 700m/s

[elitesniper]

unless you provide a video of you shooting through a chrony with said gun then we say it cannot shoot 700m/s

[john bunsenburner]

I ditto that, maybe the chron says 70.0 or 7.00m/s? Sounds more plausible.
Also the gun uses a soda bottel as a main chambre kind of getto and pathetic imho, its just unprofessional looking, also too much duck tape on the bottel to mask it, makes things even worse. The fact he can shoot it in his fairly small room shows its pretty weak. the construction it's self, along with the concept is not bad however, perhaps the practical part needs soem more work. I mean really all you need to do is invest a bit more time and maybe a bit more money(damn i bet you could find some piece of pipe suitable as a chambre) to make this look real good. Last but not least this gun should really have a stock and a painjob wouldn't hurt.
That's my two cents.

[inonickname]

wow there is a lot of stuff on that forum ... pity i cant read french .

I (fortunately) know enough french to get through it. If you don't you can just go put the url in babelfish then you can navigate the site in english.

There's some good stuff there..repeaters, spring loaded bv's, piston valves..

And John, drink bottles (and aluminum ones) are common in french cannons.

Not a bad gun at all..we could do with him on the forum (even if his english is average? unsure..)

[far_cry]

700 m\s
maybe a get fly above the chrony ?

700 fps is more likely . with 300 psi
maybe the blast of the air interrupt the chrony reading

[john bunsenburner]

Alli drink bottels i am ok with but those poly ethelene soda bottels are, in my opinion, just unprofessional and ugly.

[poppamies]

sorry i mean 3000psi then it shoot 700m/s.

[john bunsenburner]

That is too big of a mistake to make, also this is an old topic, you should of noticed that a month or so ago. Last but not least a normal blogun would be pretty fucking hard to triger at 3000psi and seeing as how this is a normal piston valve in principe that would be needed to pilot it. Of coarse there would eb an expeception to this however i am pretty sure you would say "yea i got that!" if i mentioned it so i will not. Another thing is that an aluminium chamber(made from normal pipe, not some thick walled custom pipe which wouldn't be used by some one who is using 3000psi and a blowgun) and 3000psi don't go together safely.

Either you are a lucky fool who will sooner or later get very hurt, or a lieing bastard that can't accept he is wrong.

You now have one chance to prove us all wrong and show us your gun has the capabilites to shoot 700m/s at 3000psi or you admit you are a lier. If you don't do either i suggest you get banned from the forum as your highly irresponsible behavious may well endanger thers, but mainly your self and we do not wish to read "mother blames dangerous internet website for death of her sun who died while using a so called spudgun" any time soon!