Aluminum UInline ~Stock Update~

Building or modifying BB, Airsoft, and Pellet type of guns. Show off your custom designs, find tips and other discussion. Target practice only!
User avatar
Spudinator
Private 4
Private 4
Posts: 80
Joined: Sun Feb 13, 2005 4:50 pm
Location: WA

Donating Members

Wed Apr 23, 2008 7:08 pm

~UPDATE~

Stock Finished.

Image


Image



Hey all, got a little something you guys should like. This is a project for school (thats right, I said school, gotta love tech schools) that I'm working on and am nearly finished with, just have a few things that need to be added on.

The gun is an inline vortex made of mostly aluminum, with a few Teflon/Nylon peices.

Specs:
.177 caliber

BB reservoir is 6" long with an ID of 1.625"

Vortex block is machined aluminum, vortex is .56"

Barrel on right now is temporary, need to purchase a POS 10-pump to salvage a barrel from...

The stock is forged aluminum (lucky find), I'll be machining the butt of the stock soon (as you can see in pics its incomplete).


New thing far as I've seen is the quick-disconnect feature I machined for disconnecting the back to fill BB's. The back twists 50 degrees then pulls out, and I'll be putting a lock on the chamber to keep it from accidentally twisting out, even though its somewhat stiff.


Image
(That little peice underneath is gonna be the underslung "grenade" launcher, uses 209 shotgun primers for propulsion, not gonna go any further than that though)

Image
The Allen bolts in there are gonna be replaced with short pins that are flush with the chamber, just using those temporarily.

Image
Barrel threads directly into the vortex block, its very sturdy and accurate.

Image
Forged stock....

Image
As you can see the barrel is pretty stubby, not gonna get much velocity or accuracy with it, just there untill I can get a longer peice.


I'll be adding the front grip, air trigger (will be inside front grip), trigger, trigger connecting rod, "grenade" launcher, and the rest of the stock throughout this week and possibly next if need be, will update with any progress.

And a Red Dot :P

What do you guys think?
Last edited by Spudinator on Thu Apr 24, 2008 6:55 pm, edited 5 times in total.
"This is so fun it should be illegal... Oh wait..."
User avatar
bigbob12345
Staff Sergeant
Staff Sergeant
Posts: 1516
Joined: Sat Dec 01, 2007 9:13 am
Location: Mercer Island,Washington

Wed Apr 23, 2008 7:11 pm

Wow Im very impressed
looks very clean
You must have a lathe

edit: I was just looking at your profile and it said you were from WA
Do you mean Western Australia or washington cause Im in washington.
brother361
Specialist
Specialist
Posts: 129
Joined: Wed Sep 19, 2007 12:19 pm
Location: maryland

Wed Apr 23, 2008 7:22 pm

wow thats awsome im taking a machining class next year
User avatar
BC Pneumatics
Sergeant
Sergeant
Posts: 1053
Joined: Tue Jan 18, 2005 6:55 pm
Location: Fresno, CA
Contact:

Donating Members

Wed Apr 23, 2008 7:26 pm

Great work as always Mark. One of the more tame projects you have taken on ;)
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Wed Apr 23, 2008 7:52 pm

looks very bad ass if i do say so myself lol.

very clean and "futuristic" looking, nice work.
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
User avatar
Spudinator
Private 4
Private 4
Posts: 80
Joined: Sun Feb 13, 2005 4:50 pm
Location: WA

Donating Members

Wed Apr 23, 2008 7:57 pm

BigBob~ US of A WA state, little ways off from Seattle.
And yah, I got a lathe heh. And a Mill, and a CNC mill, and a CNC lathe, and lots of other goodies :D



BC Pneumatics wrote:Great work as always Mark. One of the more tame projects you have taken on ;)


LOL, you could say that, probably tamest peice I've done in a year lol


Ohh and forgot to mention that I'm putting in a feed plate too, just gotta find an acceptable spring.
"This is so fun it should be illegal... Oh wait..."
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Wed Apr 23, 2008 8:02 pm

Spudinator wrote:Ohh and forgot to mention that I'm putting in a feed plate too, just gotta find an acceptable spring.
(depending on the diameter of your chamber) I would suggest bed/couch-cushion springs, they are usually long enough (if not you could always braise a couple together) and have moderate resistance..making it perfect for bbmg's...
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

Wed Apr 23, 2008 8:09 pm

So i hope HP (high pressure) is going into this. Looks like BTB has some competition :o

But its nice gun especially the machining. Wish i had those toys as i will call it. Would make spudding alot easier for me :roll:
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
Spudinator
Private 4
Private 4
Posts: 80
Joined: Sun Feb 13, 2005 4:50 pm
Location: WA

Donating Members

Wed Apr 23, 2008 8:26 pm

The HighP version is next, gonna be running dual barrel/vortex and all alum construction but smaller chamber volume for quick response (and save on ammo consumption lol).

STHORNE~ Thats a great idea never thought of that, thanks! I'll have to look for some old POS furniture for salvage...
"This is so fun it should be illegal... Oh wait..."
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Wed Apr 23, 2008 8:31 pm

Spudinator wrote:What do you guys think?
What do I think? I think you deserve a medal :D

That thing is freakin' nice man, love it! :)
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Wed Apr 23, 2008 8:33 pm

Spudinator wrote:STHORNE~ Thats a great idea never thought of that, thanks! I'll have to look for some old POS furniture for salvage...
lol, no problem...always happy to help a fellow spudder...

I got a bunch for a prank one time...

i got a bunch of couch cushion springs and put them all in a tube-sock (as a "jumping snake" and shoved that baby in a peanut butter jar....bout 2 hrs later, i asked my mom to make me a PB&J and WHAM! snake flied in the air and i get one sh*tty sandwich (payback i guess) lol
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
User avatar
Spudinator
Private 4
Private 4
Posts: 80
Joined: Sun Feb 13, 2005 4:50 pm
Location: WA

Donating Members

Wed Apr 23, 2008 10:25 pm

~UPDATE~

Stock Finished.

Image


Image
"This is so fun it should be illegal... Oh wait..."
User avatar
mike1010
Specialist
Specialist
Posts: 197
Joined: Thu Jun 21, 2007 6:38 pm

Mon Jun 09, 2008 3:22 am

wow looks great. is the stock movable/ adjustable, or is it custom fit for you?
User avatar
)DEMON(
Sergeant 4
Sergeant 4
Posts: 1391
Joined: Sun Mar 12, 2006 1:22 pm
Location: Johannesburg South Africa

Mon Jun 09, 2008 3:41 am

Wow, very impressive! It looks awesome to say the least. I like the machine work you've done, it's very clean.

How did you make the grip frame?
Forever dreaming...
Post Reply