Vortex Cap BBMG Rifle (With Videos and Damage Pics)
Posted: Mon Jun 28, 2010 3:23 pm
by clemsonguy1125
Well I finally got around to building this rifle. Ive been designing it for several months but was busy with other guns. Its not 100 percent done but its fully functional. Compared to my inline this has a higher rof, better feeding, and better power.
Things To Finish
Paint
Close off open half
Add handel
Add stock
Type-Vortex Cap BBMG
Accuracy-Ok at Close range, Spreads like a shotgun
ROF-55 RPS
Power-Shreds cans at 90 psi
[youtube][/youtube]
[youtube][/youtube]
[youtube][/youtube]
Im shooting the foam from about 45 feet
[youtube][/youtube]
Posted: Mon Jun 28, 2010 3:33 pm
by Lockednloaded
looks clean and cool, if the hopper is not already glued, I would put the hopper inline with barrel and foregrip. what kind of barrel did you use?
Posted: Mon Jun 28, 2010 3:37 pm
by clemsonguy1125
Thanks, its glued but I like it there, kinda like a paintball hopper, I used a piece of brakeline, I think its 9/16 but Im not sure
EDIT-I meant 9/32
Posted: Mon Jun 28, 2010 5:36 pm
by deathbyDWV
Looks great. How exactly did you flaten the pipe/shroud? Or is that jst the pic making it look flat?
Posted: Mon Jun 28, 2010 5:45 pm
by clemsonguy1125
No it's flat, I baked it in the oven for 5 min at 300 degrees and then it becomes soft and easy to shape, it, thanks
Posted: Tue Jun 29, 2010 11:33 am
by Gun Freak
Cool it's gonna look alright with a stock just looks a little wierd with the open box and all, once you paint it and add a stock and close everything it'll be pretty cool.
Posted: Tue Jun 29, 2010 11:35 am
by clemsonguy1125
Yeah I need a few parts, a cheap airsoft gun for the handel, And I melting pvc for the stock also, I loading a video, any ideas what the stock should look like.
Posted: Tue Jun 29, 2010 11:37 am
by Gun Freak
I think something like the M4 stock would look cool, hard to make out of PVC unless you get creative
Posted: Tue Jun 29, 2010 11:39 am
by clemsonguy1125
Not real I crush on piece for the top and bottom and shape the bottom while soft
Posted: Tue Jun 29, 2010 11:44 am
by Gun Freak
Then it wouldn't really look the same, but I go for replicas
Posted: Tue Jun 29, 2010 11:46 am
by clemsonguy1125
I wasnt going for replica just a assult rifle combo gun, the stock would look similair
Posted: Tue Jun 29, 2010 11:48 am
by Gun Freak
Alright cool, saw the video, pretty nice but it looks like there is a TON of spread.
Posted: Tue Jun 29, 2010 11:51 am
by clemsonguy1125
Yeah, at 50 feet it has like a 10 foot spread, all my guns do that for some reason, But im more likely to hit something, could it be my barrels not good
Posted: Tue Jun 29, 2010 12:01 pm
by Gun Freak
Probably, cause I only get about a 3 foot spread at 50 feet with mine.
