Page 1 of 2
My new marker gun will be serviceable
Posted: Wed Jul 09, 2008 9:30 am
by Sticky_Tape
Well after so many repairs being made to pistons in my minis having to grind the gun open with a dremel
(kinda pissin me off) and marker guns generally not working I have decided I am going to make a seviceable marker gun.
Posted: Wed Jul 09, 2008 2:32 pm
by Sticky_Tape
Bump
Posted: Wed Jul 09, 2008 5:46 pm
by jackssmirkingrevenge
Looking good
one of the pitfalls of epoxy unfortunately.
Posted: Wed Jul 09, 2008 6:01 pm
by pat123
I like it, you should house it in an actual marker
Posted: Thu Jul 10, 2008 9:42 am
by Sticky_Tape
I found the fitting I wanted 1/2'' female adapter.
unfortunatly the gun is a bit longer than the largest marker I could find.
And JSR epoxy is the best thing for strength but when the piston breaks the whole gun is useless if you can't fix it That is the reason why I made the gun serviceable that was probably aparent.
Posted: Thu Jul 10, 2008 12:17 pm
by pat123
just let the schrader stick out of the back and the tip of the barrel out of the front.
Posted: Thu Jul 10, 2008 12:22 pm
by Sticky_Tape
Did you think about somthing for the 1/2 female adapter? That is widder than the marker.
Posted: Thu Jul 10, 2008 1:11 pm
by starman
Pretty nifty little unit there. I assume you'll fire by piloting through the schrader. What did you have in mind to trigger it?
Posted: Thu Jul 10, 2008 5:04 pm
by Sticky_Tape
Just a small mettal rod to pilot.
Posted: Fri Jul 11, 2008 7:42 am
by Sticky_Tape
Somthing annoying happened last night I couldn't find the marker gun I guess that was a test of it's consealibility couldn't find it if I tried This morning I got up and I found it 2 minutes after I got up so it's all good now
Posted: Sun Jul 20, 2008 5:56 pm
by Gippeto
Looks like a fun little project. Good job on it too!
We await the obligatory damage pics.
Posted: Mon Jul 21, 2008 9:44 am
by Sticky_Tape
I have a great video that I wish I could put on this computer but it is retarded so I can't I will get on those dammage pics.
Posted: Mon Jul 21, 2008 9:53 am
by paaiyan
What kind of pressures will you be using?
Posted: Mon Jul 21, 2008 10:03 am
by Sticky_Tape
I don't have a guage but it is definantly a minimum of 300psi
Posted: Mon Jul 21, 2008 10:13 am
by paaiyan
Sweet, can't wait to see it in action.