sorry I couldn't find/remember the thread that concluded whether or not gasoline/denatured alchole damages pvc pipe...
if you could send me a link/ just tell me it'd be appreciated.
gasoline
-
Pete Zaria
- Corporal 5
- Posts: 954
- Joined: Fri Mar 31, 2006 6:04 pm
- Location: Near Seattle, WA
Gas will eat PVC, but not ABS. As far as I know, denatured alcohol is OK. Get some second opinions, though.
Peace,
Pete Zaria.
Peace,
Pete Zaria.
ah we have a flamethrower builder here now don't we? 
. yeah whatever you do, do NOT use pvc. pvc piping is soluble in gasoline, however denatured alcohol will no damage pvc piping... use abs piping just to be safe though.
. yeah whatever you do, do NOT use pvc. pvc piping is soluble in gasoline, however denatured alcohol will no damage pvc piping... use abs piping just to be safe though.-
Shrimphead
- Corporal
- Posts: 509
- Joined: Thu Nov 17, 2005 7:42 pm
Everybody says that gasoline eats pvc, but somebody, I can't remember who, soaked some pvc in gasoline and absolutely nothing happened. I suggest you get a scrap piece and test for yourself.
Controlled insanity = Genius
Life flies when you're being dumb.
Life flies when you're being dumb.
That would be Plasticex009 on Spudtech in <a href="http://forums.spudtech.com/topic.asp?TO ... 7896">this thread</a>.
Gasoline does absolutely nothing to PVC.
If you don't have a Spudtech Forum membership - which you should - you cannot view that page.
Gasoline does absolutely nothing to PVC.
If you don't have a Spudtech Forum membership - which you should - you cannot view that page.
<a href="http://www.launchpotatoes.com"><img src="http://www.launchpotatoes.com/images/up ... 2.PNG"></a>
http://www.LaunchPotatoes.com
http://www.LaunchPotatoes.com
-
Darkside 6ix
- Specialist 2
- Posts: 298
- Joined: Sun Apr 30, 2006 6:53 am
- Location: United States
yea that what i thought
but my question is that can i use gasoline for a mini pill shooter?
but my question is that can i use gasoline for a mini pill shooter?
-
boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
I don't know the material they are made of, but gasoline is really a bit too long to be a good solvent... so it'll probably be fine.
-
pyromanic13
- Corporal 5
- Posts: 913
- Joined: Wed Oct 19, 2005 7:54 pm
no, its for a flamethrower...
-
pyromanic13
- Corporal 5
- Posts: 913
- Joined: Wed Oct 19, 2005 7:54 pm
Oh... what about the denature =d alchohol, on the back of the can it said it could be used as a "thinner".
-
pyromanic13
- Corporal 5
- Posts: 913
- Joined: Wed Oct 19, 2005 7:54 pm
and is there an age you have to be to buy gasoline.
i can safely comfirm tha gasoline does not dissolve PVC. last night, after reading about this, wen to my garage where i cut a portion of 3/4" sch40 PVc and soaked it in gasoline overnight. By today in the afternoon, the pvc was still intact with no harm done to it. so it is safe to say that gasoline is safe for PVC. If you dont believe me, try it yourself.