Would this design work?

spudkilla · Tue Jul 03, 2007 9:43 am

Modderxtrordanare wrote:I only see two things sticking out, but one of them is his filling valve. (Schrader, Quick Connect, etc..)

Edit: I see the third thing, sticking off the top of the chamber and not the endcap. Pressure gauge probably.

Exactly!

lukemc · Tue Jul 03, 2007 9:59 am

spud yeti there is no way all pop off valves wil go at exactly the sme time.if you are pumping it up on will always be a tiny bit weaker. now if you had a ball valve or something and another chamber you could dump lots of air instantly and they would all go off

spud yeti · Tue Jul 03, 2007 10:20 am

LOL, it wasnt actually my idea, but i agree that it wouldnt be possible really. it was just a funny thought!

spudkilla · Tue Jul 03, 2007 9:53 pm

posted an update

bucky242 · Thu Jul 05, 2007 7:40 am

find some one with a lave and take a piece pipe the same size as the open breach and just make it wider or i have another idea i will post

bucky242 · Thu Jul 05, 2007 7:48 am

You could use rubber rings on the breach to keep the seal

chaos · Thu Jul 05, 2007 7:50 am

bucky you can use the

button to edit your posts

just pointing that out

Modderxtrordanare · Thu Jul 05, 2007 3:23 pm

bucky242 wrote:find some one with a lave and take a piece pipe the same size as the open breach and just make it wider or i have another idea i will post

First off, its spelled lathe and second off, that made absolutely no sense. You don't make things bigger with a lathe, you turn them down and make them smaller in diameter.

P.S. What are the rules on talking about drugs here.

(see italicized section in quote) Just kidding.

Would this design work?

Donating Members