these are the plans i was talking about.
Other than the sprinkler valve being way too small for the barrel size (you need a 2" sprinkler at the least for a TB barrel), the plans look sound, other than the fact that they didn't mention the pipe needs to be pressure rated.
You don't need to be able to read them really, you can easily tell what the parts are.
You don't need to be able to read them really, you can easily tell what the parts are.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
-
potatoflinger
- Sergeant 2
- Posts: 1136
- Joined: Thu Nov 02, 2006 3:26 pm
- Location: Maryland
You would definitely need a larger valve. I use a .75" QEV on my tennis ball gun, and the power isn't really all that great 
Also, you might not be able to find 2.5" pipe in the same section of the hardware store that normal PVC pipe is, you might need to use that gray electrical conduit. (at least that's the way it is around where I live, but the stores around where I live don't have any of the parts I need...)
Also, you might not be able to find 2.5" pipe in the same section of the hardware store that normal PVC pipe is, you might need to use that gray electrical conduit. (at least that's the way it is around where I live, but the stores around where I live don't have any of the parts I need...)
It's hard to soar with eagles when you're working with turkeys.
