OMG! It still doesnt work =(

A place for general potato gun questions and discussions.
Post Reply
nabu92
Private 4
Private 4
Posts: 94
Joined: Sat Jan 21, 2006 6:57 pm

Wed Feb 08, 2006 8:01 pm

:twisted: :twisted: :twisted: :twisted: I recently spent about $100 on making a simple combustion cannon(10 in. chamber...36 in. barrel)...but it wont work!..I think it has something to do with the ignition...I tried BBQ and camera flash ignition.both BBQ and camera ignitions always make a spark when i test the cannon without fuel inside..but i dont think it makes a spark when there is fuel in the chamber, Then i thought it had to do with the air/fuel mix, so i installed a fan.....guess what?!..it still doesnt work. I spray about 3 seconds of right guard into the chamber, turn the fan on for 3 seconds...charge the camera.....and ignite....but nothing happens...ive been trying to make my spudgun work for about a month...and im about to give up.... :( ......or make a pneumatic cannon..... :) .......I would EXTREMELY appriciate it if someone could help me out.

thanks,
nabu92
Top
User avatar
PCGUY
Owner
Owner
United States of America
Posts: 1436
Joined: Wed Aug 18, 2004 10:54 pm
Location: Illinois
Has thanked: 2 times
Been thanked: 26 times
Contact:
Contact PCGUY

Wed Feb 08, 2006 8:33 pm

I guess I should post the info here but no longer does Rightguard work. They changed the formula and it is no longer flamable.
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).
Top
User avatar
Rambo
Corporal
Corporal
Posts: 509
Joined: Sun Jan 15, 2006 2:07 pm

Thu Feb 09, 2006 3:19 am

My canons are very difficuld to ignite too(with a piezo sparker from a lihgter) so I use a capasitor.
Attachments
ignition.JPG
ignition.JPG (12.38 KiB) Viewed 3062 times
Top
User avatar
Lucas_Pukas
Private 3
Private 3
Posts: 46
Joined: Mon Jan 09, 2006 9:53 pm
Location: Colorado

Thu Feb 09, 2006 4:31 am

It sounds to me like your fuel is not combustable like PCGUY mentioned. Without being able to see the gun and try to ignite it, that is all I can think of other than the possibility of the fuel/air mix. Best of luck man, and don't give up.
Top
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:
Contact jrrdw

Donating Members

Thu Feb 09, 2006 6:27 am

yea-try hair spray

anything that says -- DO NOT USE NEAR OPEN FLAME/CAUTION FLAMABLE, anything along them lines
Top
nabu92
Private 4
Private 4
Posts: 94
Joined: Sat Jan 21, 2006 6:57 pm

Thu Feb 09, 2006 6:14 pm

I guess I'll go out to CVS and buy some new fuel, thanks guys.

guess what, i found the best spud gun fuel, it contains propane, hexane, butane,and acetone....the only problem is that is is spray adhesive :?
dont you think if i spray a lil in my chamber, ignite, and then wipe it all off itll b ok?
Top
cardinals08
Specialist 2
Specialist 2
Posts: 270
Joined: Thu Dec 22, 2005 5:07 pm

Thu Feb 09, 2006 6:19 pm

you can modify your posts, they hate it when people double post. and just becuase it has alot of flammable fuels, doesnt mean that the quantity of them add up to as much as just one or two in another fuel
Top
User avatar
beebs111
Corporal 4
Corporal 4
Posts: 807
Joined: Thu Aug 25, 2005 3:08 pm
Location: massachussets

Thu Feb 09, 2006 8:32 pm

just put a propane meter into it 8) itll work every time
Top
Post Reply

Return to “General How-To & Discussion”