Regional Ohioans listen up!
I think that was last year.... You must be near AEP Ohio power gamelands...sandman wrote:im exactingly in the middle of I-77 between Cleveland and Marietta so im close to fnord
if this is still in the works
- SpudsMcGee
- Specialist
- Posts: 160
- Joined: Mon Nov 10, 2008 10:03 pm
Oh, dude I live in West Virginia.
(\_/)
(o.o)
(><)
Current Project: Slasher Valve
(o.o)
(><)
Current Project: Slasher Valve
Well sandman i am willing to do something still but thats after the winter breaks, and spring finally starts.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
I'd love to take a drive to do some shooting. A few hours might not be enough though. The KY shootouts always lasted about a week. There's always so much to do.
I'll know if I can when it gets closer. I'll have to see if my work schedule will let me.
I'll know if I can when it gets closer. I'll have to see if my work schedule will let me.
<a href="http://www.launchpotatoes.com"><img src="http://www.launchpotatoes.com/images/up ... 2.PNG"></a>
http://www.LaunchPotatoes.com
http://www.LaunchPotatoes.com
- Daltonultra
- Specialist 3
- Posts: 301
- Joined: Mon Nov 24, 2008 8:17 pm
- Location: Columbus, Ohio, U.S.A.
- Has thanked: 1 time
- Been thanked: 2 times
I too, am up for the drive to anywhere in Ohio, provided, of course, that I can borrow Dad's truck to haul the cannons.
The Official High-Tech Redneck
"There is no such thing as overkill." ~Solomon Short
"There is no such thing as overkill." ~Solomon Short
I live in Hudson, I can come if my dad can give me transportation. I'll bring my big pneumatic and, if i have one built, a hybrid.
"i wonder if i can do that a little lowe- oh apparently no"
"If a little is good.....more is better"
My last words: "Ooooo! what does that do!?!?"
"If a little is good.....more is better"
My last words: "Ooooo! what does that do!?!?"
I am still considering this somewhat, we would need a time and a place but for right now i must finish my spanish video project so ill get back to this as soon as i can.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
ok, so us at spudfiles have a possibility for an awesome collaboration with kent state university tuscarawas campus. they created "Cyber clubs" in five area schools, these clubs focus on engineering, and we have gone on trips to engineering stuff. My cyber club adviser approached me about a spud gun day. This is when i though hey i know alot of ppl that would like to participate.
So, i want to see how many people from spudfiles think they could make it on like April 18 or 25. I want to propose those day to my teacher. Also, i am going to look into if they could cover your travel costs if that is a factor.
This is a chance for spud files to make a display of how fun and safe potato cannons to be to a large group of people. I am goign to do everything in my power to make this happen.
So, i want to see how many people from spudfiles think they could make it on like April 18 or 25. I want to propose those day to my teacher. Also, i am going to look into if they could cover your travel costs if that is a factor.
This is a chance for spud files to make a display of how fun and safe potato cannons to be to a large group of people. I am goign to do everything in my power to make this happen.
- King_TaTer
- Specialist 2
- Posts: 265
- Joined: Fri Nov 17, 2006 6:14 pm
Dang wish I would have seen this thread earlier. I live in Lake County OH close to Cleveland. I've spoken to you Crotchus a while back. I'm definitely in if it's still a green light.
I would like to go to what you are doin sandman, and that would probably be the only thing i would go to. I can probably make the 18th but definately not the 25th.
Im a really not sure of this because this thread is almost a year old and it was intentionally made for last year so i dont know whats goin on yet but if i can find a date and a place that we all can agree on then i would be more than happy to go.
Im a really not sure of this because this thread is almost a year old and it was intentionally made for last year so i dont know whats goin on yet but if i can find a date and a place that we all can agree on then i would be more than happy to go.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
- King_TaTer
- Specialist 2
- Posts: 265
- Joined: Fri Nov 17, 2006 6:14 pm
Ok Crotchus either You or someone else could start a new thread. pm _Fnord and anybody else to make sure they see it. I doubt I will be able to go Kent on such short notice but we'll see.
Materials links:
<a href="http://www.discounthydraulichose.com/">Discount Hydraulic Hose</a>
<a href="http://www.buyfittingswholesale.com/#">Buy fittings wholesale</a>
<a href="http://www.flexpvc.com/">Flex PVC</a>
<a href="http://www.murrayequipment.com">MEI
</a>
<a href="http://www.discounthydraulichose.com/">Discount Hydraulic Hose</a>
<a href="http://www.buyfittingswholesale.com/#">Buy fittings wholesale</a>
<a href="http://www.flexpvc.com/">Flex PVC</a>
<a href="http://www.murrayequipment.com">MEI
</a>