Trouble Finding Parts
I have gone to 2 Home Depots, 1 Menard's, 2 Ace Hardware's, and 3 other local hardware stores. None of them had many pressure rated pieces. I found some elbows but that's about it. All the other stuff was DWV. Is this just because Minnesota doesn't make much of it or doesn't supply much of it? I finally found the 2" to 1" bushing i was looking for at a plumbing store a ways away. Any ideas why my local Home Depot, Menard's or Ace Hardware's wouldn't have many pressure rated fittings.
Try sprinkler.com there fittings are reasonably priced and shipping is a flat 7 dollars on most orders.
Or you could see if you have a decent lawn care store in your area that does installs of sprinkler systems, they use high pressure water so all there fittings will at least be nsf pw sch 40 and in many cases can get sch80.
Or you could see if you have a decent lawn care store in your area that does installs of sprinkler systems, they use high pressure water so all there fittings will at least be nsf pw sch 40 and in many cases can get sch80.
mobile chernobyl wrote:I can shoot a Canuter Valve off my '82 Chevy Ram F150 AT LEAST 3/4 Mile with 'ma cannon made of soup cans duct taped together, then I just squirt some bacardi 151 in the chamber and hold up my cigarrete lighta and WHOOSH! That thing flies at least 3/4 mile
i dont undersand why you cant find a pressure rated 2inch elbow. i undersand that some might not have it but all 3 stores that i go to (true value, homedepot, menards) have pressure rated 2inch elbows AND dwv in the same size/thing. so if you find a dwv then look away you might miss the good one.