Pressure Outside DWV
In a coaxial for example, would it be safe to use a DWV coupling on the barrel as a sealing face? This way I would'nt have to worry about cutting a smooth surface. i'll probably just get a PW one but I was just wondering.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
- drac
- Corporal 4
- Posts: 899
- Joined: Sun Apr 24, 2005 8:56 am
- Location: Avon, NY
- Been thanked: 2 times
Obviously because the sealing face will be pressing against it. I don't think it's gonna make a difference because the DWV is the same type of PVC, not any lighter or anything, all that's different is the bonding aread, which plays no part in this.
The barrel experiences force, so I don't know why a coupling shouldn't be able to hold up.
The barrel experiences force, so I don't know why a coupling shouldn't be able to hold up.
Ok thanks, since I can't cut smooth surfaces myself I'll probably have to add a coupler. Would I need to glue it on? I'm guessing yes.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
If it's DWV PVC it's probably fine... The company's just say DWV just to cover their butts because it COULD cause shrapnel... but a couplins blowing out most likely wouldn't do any damage if it somehow did break...
If it's DWV ABS it's 100% fine in a Combustion... I'm not sure about a Pneumatic ABS though...
for "glueing" ABS use ABS Cement
for "glueing" PVC use Primer first (normally purple) then wait about 30 seconds for the pipe to "melt" (you can't see it "melt") and then use PVC glue
If you must resort to All Purpose Cement make sure it's for ABS, PVC, and CPVC (All Purpose isn't as good in my opinion)
"glueing" pipes is called Solvent Welding because the pipes get bonded together as if you welded them
If it's DWV ABS it's 100% fine in a Combustion... I'm not sure about a Pneumatic ABS though...
for "glueing" ABS use ABS Cement
for "glueing" PVC use Primer first (normally purple) then wait about 30 seconds for the pipe to "melt" (you can't see it "melt") and then use PVC glue
If you must resort to All Purpose Cement make sure it's for ABS, PVC, and CPVC (All Purpose isn't as good in my opinion)
"glueing" pipes is called Solvent Welding because the pipes get bonded together as if you welded them
-FrOgY-
I wish people would stop needing a better signature!
I wish people would stop needing a better signature!
- drac
- Corporal 4
- Posts: 899
- Joined: Sun Apr 24, 2005 8:56 am
- Location: Avon, NY
- Been thanked: 2 times
No more drunken ramblings please...frogy wrote:If it's DWV PVC it's probably fine... The company's just say DWV just to cover their butts because it COULD cause shrapnel... but a couplins blowing out most likely wouldn't do any damage if it somehow did break...
If it's DWV ABS it's 100% fine in a Combustion... I'm not sure about a Pneumatic ABS though...
for "glueing" ABS use ABS Cement
for "glueing" PVC use Primer first (normally purple) then wait about 30 seconds for the pipe to "melt" (you can't see it "melt") and then use PVC glue
If you must resort to All Purpose Cement make sure it's for ABS, PVC, and CPVC (All Purpose isn't as good in my opinion)
"glueing" pipes is called Solvent Welding because the pipes get bonded together as if you welded them
EDIT: DAMMIT DEMON!