Page 1 of 1
Steyr AUG paintball rifle design
Posted: Thu Jul 27, 2006 12:24 pm
by Torch
Okay, i've had this idea floating around my mind for a while and im wondering if it would work right. It has a few curves in it..
And heres the AUG rifle itself from the
Wikipedia Any comments/design input?
Posted: Thu Jul 27, 2006 2:25 pm
by singularity
well that looks pretty much the same as my paintball gun, and my gun works just fine
Posted: Thu Jul 27, 2006 7:53 pm
by M3NT4L
Why shouldent it work all it neeeds is to be airtight and you should have sch 40+ pipe for every part including the breach.
Posted: Thu Jul 27, 2006 8:10 pm
by CS
Let me start by saying, I HATE your avatar... lol
Now thats out the way, yes it will work. Although as you most likely realize thats extremly off from accurate "scaleness". Do me a favor and "butt" the fittings when you do it
It might be better to have 2 tees off the valve and chamber, that way you could connect those, and then have your stock stick into the other socket off the tee. This would increase performance if the stock was blocked off.
Posted: Thu Jul 27, 2006 8:24 pm
by Torch
lol, im just to lazy to change my avatar right now. Thanks for the advice on the tees..I will prob do that and change it up a bit.
