Does Anyone know how to make Camera flash sparkers
-
Ballad_Black
- Specialist
- Posts: 159
- Joined: Sat Oct 15, 2005 10:38 am
Goto getoffmynuts.com. It's an actual site with stupid videos, but one shows you how to make it, a full length video, about 5 mins on how to do it. Its under "Our Videos". Just keep hoveing over pictures of the videos to see what they're about and finally you'll see taser.
it doesnt really get much more complicated than this.... http://www.angelfire.com/80s/sixmhz/camera.html
-
Ballad_Black
- Specialist
- Posts: 159
- Joined: Sat Oct 15, 2005 10:38 am
What do you mean, you dont know how to ignite it in the cannon? No matter what you find, thats how to make the stun gun from a camera. You run the wires to screws in the chamber, Its not a difficult process, I promise.
If you cant figure it out you dont need it. Remember that.
If you cant figure it out you dont need it. Remember that.
-
boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
-
Timekiller
- Private
- Posts: 4
- Joined: Thu Oct 20, 2005 6:38 pm
The only way to fire it in the comb. chamber is mechanicly strike the two contacts with a piece of metal.
BTW... What Shandora is talking about is there is not enough amperage in a camera cap to jump a gap. A taser is built a little diff.
BTW... What Shandora is talking about is there is not enough amperage in a camera cap to jump a gap. A taser is built a little diff.
-
boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
"...mechanicly strike the 2 contacts with a piece of metal."
Not true, at least Galfrisk doesn't think so.
"amperage"
That'd be voltage... which is not entirly true; it just has to be a small gap.
Not true, at least Galfrisk doesn't think so.
"amperage"
That'd be voltage... which is not entirly true; it just has to be a small gap.
-
Timekiller
- Private
- Posts: 4
- Joined: Thu Oct 20, 2005 6:38 pm
Yes voltage sorry... but the gap would be very small, almost impossible to create without touching.
And you could rig something to strike the contacts, like get an old R/C car remote and servo. Put a piece of metal on it, and when you move the servo, bam! remote firing!
And you could rig something to strike the contacts, like get an old R/C car remote and servo. Put a piece of metal on it, and when you move the servo, bam! remote firing!
