diaphram/piston coaxial
- origin unknown
- Corporal
- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
This started out as a diaphram cannon, but later on I decided to create a piston for it to see if it would perform any better. Now I have a gun that can be used as a diaphram or a piston gun using the benifits of both valves, and I believe I am the first to do this.
SPECS
chamber: 1.5" sch40 pvc
barrel: 0.5" sch40 pvc
valve: selectable; diaphram or piston
pilot valve: modded blowgun w/ ball valve safety
fill valve: screw-in schrader or a check valve attached to coupler nipple
My diaphram is made of 1/8" sheet rubber, and it fits between a male adaptor and a female adaptor. My piston, which fits inside the male adapter, is made of hot glue and it has a neoprene sealing face. My diaphram works great, it shot a medium weight projectile about 100 ft upwards pointing the launcher straight up. The piston did work, It just didn't open fast enough to let a sufficient amount of air come out the barrel. This problem could easily be fixed, by using a larger pilot opposed to my smaller modded blowgun. This is my first gun with a completely homade valve, and I am very proud of it. I plan to be making a barrel sealing piston valve with 1.5" porting all housed in a 2" T, but it won't be started for a while.
SPECS
chamber: 1.5" sch40 pvc
barrel: 0.5" sch40 pvc
valve: selectable; diaphram or piston
pilot valve: modded blowgun w/ ball valve safety
fill valve: screw-in schrader or a check valve attached to coupler nipple
My diaphram is made of 1/8" sheet rubber, and it fits between a male adaptor and a female adaptor. My piston, which fits inside the male adapter, is made of hot glue and it has a neoprene sealing face. My diaphram works great, it shot a medium weight projectile about 100 ft upwards pointing the launcher straight up. The piston did work, It just didn't open fast enough to let a sufficient amount of air come out the barrel. This problem could easily be fixed, by using a larger pilot opposed to my smaller modded blowgun. This is my first gun with a completely homade valve, and I am very proud of it. I plan to be making a barrel sealing piston valve with 1.5" porting all housed in a 2" T, but it won't be started for a while.
- Attachments
Last edited by origin unknown on Thu Jul 05, 2007 2:34 am, edited 1 time in total.
Ecclesiastes 1:9 - What has been will be again, what has been done will be done again; there is nothing new under the sun.
- spud yeti
- Sergeant
- Posts: 1030
- Joined: Tue May 08, 2007 1:41 pm
- Location: Cape town south africa
- Contact:
That looks like a really cool little cannon you have there! I love how it is interchangeable too! As I was looking at your gun, I thought of something... What if you had both the piston and the diaphram in?? You would have the sealing power of the piston and opening speed of the diaphram! Just a thought though, so why dont you try it and see!?
Really good work though!
Really good work though!
really good quote/phrase here
- origin unknown
- Corporal
- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
The only way to combine the two would have one piloting the other. I would have to build a different gun to test that. Maybe a homemade diaphram piloting a piston... that would be interesting because most people use sprinkler valves or QEVs to pilot their piston, not anything homemade.spud yeti wrote:That looks like a really cool little cannon you have there! I love how it is interchangeable too! As I was looking at your gun, I thought of something... What if you had both the piston and the diaphram in?? You would have the sealing power of the piston and opening speed of the diaphram! Just a thought though, so why dont you try it and see!?
Really good work though!
Ecclesiastes 1:9 - What has been will be again, what has been done will be done again; there is nothing new under the sun.
- spud yeti
- Sergeant
- Posts: 1030
- Joined: Tue May 08, 2007 1:41 pm
- Location: Cape town south africa
- Contact:
Yeah, thats a really good idea, and could be fun to experiment with! Maybe you could sketch a few plans and I'll do like wise and we'll see what comes out! I have loads of time (school holidays).
back on topic though: nice cannon! (Im trying not to hijack threads )
back on topic though: nice cannon! (Im trying not to hijack threads )
really good quote/phrase here
I don't have a chrony, but in order, damage-wise, the piston was worst (shot through one side of a can), diaphragm was second, (shot through one side and split open the other side), and the combination shot through both sides and dented my shed.
nice. what did you get the rubber from and what did you cut it with? its a great looking gun you got.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
- origin unknown
- Corporal
- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
I used these nice Fiskars scissors that are used to cut thicker materials, especially bushes and small branches.
Ecclesiastes 1:9 - What has been will be again, what has been done will be done again; there is nothing new under the sun.
- origin unknown
- Corporal
- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
I sprayed the inside of the pipe my piston was in with cooking spray and squirted the hot glue in. It is quite simple...
Ecclesiastes 1:9 - What has been will be again, what has been done will be done again; there is nothing new under the sun.
- spud yeti
- Sergeant
- Posts: 1030
- Joined: Tue May 08, 2007 1:41 pm
- Location: Cape town south africa
- Contact:
Another method: cooking oil works well, but if you having trouble with it you can also use greased up baking paper around the inside of the pipe, this increases flow quite nicely too.
Did you melt the glue through the gun or microwave it or what though?
Did you melt the glue through the gun or microwave it or what though?
really good quote/phrase here
- origin unknown
- Corporal
- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
I melted it through the glue gun.
Ecclesiastes 1:9 - What has been will be again, what has been done will be done again; there is nothing new under the sun.