I just bought a powerful scope to replace my old not so powerful scope.and i want to know What are those numbers on top of every scope,mine says
6-24x44
is it like 6 is for 6 times zoom and the 24 is 24yards and 44 is I DON'T KNOW.
help me/thank yous
rifle scopes
- jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
6-24 is the magnification (it can magnify from 6 times to 24 times, you should have an adjusting dial) and the 44 means the main lens is 44mm in diameter.
hectmarr wrote:You have to make many weapons, because this field is long and short life
6x-24x zoom X 44mm aperture (view diameter)
enjoy it
EDIT:
damn Jack has beaten me to it yet again.
enjoy it

EDIT:

- singularity
- Corporal 5
- Posts: 982
- Joined: Mon Jun 26, 2006 10:53 pm
- Location: someplace
- Contact:
there are two parts to any scope's numbers. the part before the "x" is the zoom factor in your case its adjustable meaning you can zoom anywhere from 6 times to 24 times in on the target. the second part is after the "x" it is the diameter of the objective lens (the scopes front lens... pretty much th biggest lens in the scope) it determines the field of view, all you need to know about the objective lens the bigger the objective lens the better (becuase you can see more). on your scope you have a 44mm objective lens
dam someone beat me to it
dam someone beat me to it
be sure to check out my <a href="http://www.spudfiles.com/forums/ak-styl ... 9.html">AK Styled Vortex Gun</a> and my <a href="http://www.spudfiles.com/forums/at-4-t9627.html">AT-4 Rocket</a>
upcoming projects... finalized clip fed BBMG and ball point pen sniper
upcoming projects... finalized clip fed BBMG and ball point pen sniper
- jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
Sorry, slow day at work :p All I've done so far in the past 2 hours I've been here is 15 minutes of honest work and fixed my car speakers hehechaos wrote:EDIT:damn Jack has beaten me to it yet again.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- CannonCreator
- Specialist 3
- Posts: 314
- Joined: Sun Aug 12, 2007 12:59 pm
- Location: Moorpark, CA
- Contact:
I got a kind of Nice Scope on my L96 Airsoft Gun. Don't know what it means for sure though.
Last edited by CannonCreator on Wed Aug 22, 2007 5:49 pm, edited 1 time in total.
- singularity
- Corporal 5
- Posts: 982
- Joined: Mon Jun 26, 2006 10:53 pm
- Location: someplace
- Contact:
what?!?!
be sure to check out my <a href="http://www.spudfiles.com/forums/ak-styl ... 9.html">AK Styled Vortex Gun</a> and my <a href="http://www.spudfiles.com/forums/at-4-t9627.html">AT-4 Rocket</a>
upcoming projects... finalized clip fed BBMG and ball point pen sniper
upcoming projects... finalized clip fed BBMG and ball point pen sniper
- boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
Nah, man, there is math involving the aperture and the power, but it goes like this:
Aperture / power = exit diameter (mind my terminology)
The exit diameter is the diameter of the image generated by the scope, which gives you an idea of how easy it will be to align your eye with the system, as well as how well it will function in low light conditions.
That is, if you have a really high power scope, you will have a small exit pupil (Yeah, I'm not sure of what you call it), which will make it difficult to obtain a sight picture, and means the image will be dim if it's dark out.
Note, however, that an exit pupil in excess of 7mm doesn't give better low-light performance, because <i>your</i> pupil can't get bigger than that, and the light that was gathered for your use in excess of that is simply wasted.
*****************************
Now, we note that CanonCreator is rambling on about who-knows-what... but it is interesting to note that you <i>can</i> estimate range using your typical "30-30" reticle by adjusting the power; though you'll require math to use this procedure for stuff other than the (16", IIRC) deer that the reticle was designed for.
Check your owner's manual, I forget the specifics.
And, no, I don't know why they call it that. Maybe something to do with the MOA separation at 1x.
Aperture / power = exit diameter (mind my terminology)
The exit diameter is the diameter of the image generated by the scope, which gives you an idea of how easy it will be to align your eye with the system, as well as how well it will function in low light conditions.
That is, if you have a really high power scope, you will have a small exit pupil (Yeah, I'm not sure of what you call it), which will make it difficult to obtain a sight picture, and means the image will be dim if it's dark out.
Note, however, that an exit pupil in excess of 7mm doesn't give better low-light performance, because <i>your</i> pupil can't get bigger than that, and the light that was gathered for your use in excess of that is simply wasted.
*****************************
Now, we note that CanonCreator is rambling on about who-knows-what... but it is interesting to note that you <i>can</i> estimate range using your typical "30-30" reticle by adjusting the power; though you'll require math to use this procedure for stuff other than the (16", IIRC) deer that the reticle was designed for.
Check your owner's manual, I forget the specifics.
And, no, I don't know why they call it that. Maybe something to do with the MOA separation at 1x.
What kind was it and what are you using it for?
I just got a Nikon 4.5-14x40 scope to go on top of my Savage .223 rifle. Any more magnification and they get really expensive for a decent one.
I just got a Nikon 4.5-14x40 scope to go on top of my Savage .223 rifle. Any more magnification and they get really expensive for a decent one.
I'm weird, I know it, you don't need to tell me.