I keep hearing about how these supah valves make your pneaumatics so much better, but im not actually sure what they do. How are they different to a normal sprinkler valve?
Can anyone help me?
What do Supah Valves do?
-
deathtodeer666
- Specialist
- Posts: 126
- Joined: Sat Sep 03, 2005 12:57 am
- Location: mars alabama
- Contact:
well they release air better and at a larger volume than a sprinkler valvle, they also have very good flow.
-
theregoesthewindow
- Private 4
- Posts: 83
- Joined: Sun Jan 22, 2006 8:05 pm
That and they have a faster actuation speed than a normal piston, Joel compares it to a diaphragm valve.
-
boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
Bah, you guys eat the sales pitch right up...
The supah valve is simply a well-built chamber-sealing pilot valve.
It has been demonstrated that piston mass doesn't matter very much to oppening time (and infact sometimes acheives the opposite of the expected effect); a diaphram isn't much faster opening than a piston valve.
Chamber-sealing valves open slightly slower than barrel-sealing valves.
The main thing that's special about the supah valve is it's high flow, which is due to the 2" porting and only 90* of inside turns. Opening time is comparable to any other valve.
The supah valve is simply a well-built chamber-sealing pilot valve.
It has been demonstrated that piston mass doesn't matter very much to oppening time (and infact sometimes acheives the opposite of the expected effect); a diaphram isn't much faster opening than a piston valve.
Chamber-sealing valves open slightly slower than barrel-sealing valves.
The main thing that's special about the supah valve is it's high flow, which is due to the 2" porting and only 90* of inside turns. Opening time is comparable to any other valve.