Propane Injection?

A place for general potato gun questions and discussions.
maka_velli_005
Private
Private
Posts: 7
Joined: Fri May 06, 2005 4:54 pm

Sat May 07, 2005 8:12 pm

I just finished building a propane meter. The meter pipe is 8.5" long and 3/8" diameter. My chamber size is 4" SCH 40 and its length is 18.5" The barrel is 3" SCH 40 and its length is 36.5" I would like some help on how much PSI of propane to inject into my chamber. I have tried several times with fuel tool and Latke's site with no success. My meter consists of 2 3/8" ball valves with a 3/8" pipe between the valves. The pipe is 8.5" long. I appreciate someones help on how much propane to fill my meter with. My chamber volume is 232.25 cubic inches.