L96 coaxal sniper

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
jamie e
Private 2
Private 2
Posts: 36
Joined: Sat Dec 27, 2008 1:32 pm
Location: auckland New Zealand

Wed Aug 05, 2009 2:58 am

This is my first cannon posted, I finished it last week after it sitting in parts in my room for about 3 months.
Spec's
Chamber: 750mm x 30mm galvanized steel pipe
Barrel: 700mm x 10mm aluminum
Valve: epoxy pisten
Pilot valve: modded blow gun
Fill valve: male quick conect with ball valve
Stock: carved from 750mm x 5mm x 160mm pine

Features: 3-9x40 scope, extendable butt pad and check pad

Its the most powerful cannon i've built and at 65psi can shoot through both sides of a can with a 9.5mm ballbearing and can shoot a cigarette through thick cardboard.

The rifle
Image

Image
butt and check pads extended
Image

Image
Scope
Image
Last edited by jamie e on Sun Oct 04, 2009 4:28 am, edited 1 time in total.
User avatar
jmadden91
Specialist 2
Specialist 2
Posts: 246
Joined: Thu May 07, 2009 6:03 pm
Location: Queensland, Australia

Wed Aug 05, 2009 3:14 am

Mate it looks great congratulations. Now you just need high pressure :D And what is the scope attached with? Looks like string?
User avatar
jamie e
Private 2
Private 2
Posts: 36
Joined: Sat Dec 27, 2008 1:32 pm
Location: auckland New Zealand

Wed Aug 05, 2009 3:17 am

sad to say it is string, but it works. would like to go high pressure but need to build or buy a pump.
User avatar
jmadden91
Specialist 2
Specialist 2
Posts: 246
Joined: Thu May 07, 2009 6:03 pm
Location: Queensland, Australia

Wed Aug 05, 2009 3:21 am

Definitely mate. If you can get your hands on a fridge compressor they can pump in excess of 500psi. If not there are heaps of examples of homemade high pressure pumps on here. Your gun is very similar to mine lol it will be up in the next couple of days.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Wed Aug 05, 2009 3:40 am

Nicely done, but it's a real pity about the improvised attachments, surely you can epoxy a bar and attach the scope properly? Or you can take some advice from jook13 and get a cheap rail, look through the first posts ;)

Also, as pointed out above, 65psi is far too low to get any real power from this design, you definitely need to invest in a good track or shock pump.

Is the "suppressor" functional or just a cosmetic item?
User avatar
jamie e
Private 2
Private 2
Posts: 36
Joined: Sat Dec 27, 2008 1:32 pm
Location: auckland New Zealand

Wed Aug 05, 2009 4:36 am

The suppressor is non functional item used to disguise the ugly end cap of the chamber. its just some PVC filled with wood filler.
I plan on going to the hardware store soon and get a bar to attach the scope and bi-pod, also for some copper pipe to build a high presser pump.
I was also thinking of welding two nuts onto the bottom of the chamber so i can bolt it straight onto the stock. Would this weaken it? if so what else could I do instead of using zip ties
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Wed Aug 05, 2009 5:07 am

jamie e wrote:I was also thinking of welding two nuts onto the bottom of the chamber so i can bolt it straight onto the stock. Would this weaken it?
Not at all, this would be a very good solution.
smexysmileyPiston
Private
Private
Posts: 7
Joined: Sat Jul 11, 2009 7:33 am

Wed Aug 05, 2009 6:35 am

hey mate...nice stock.pity the string.

jmadden91-can u do u know any sights that will show me wat fridge compressors look like :oops: and other info on them..caz i dnt no much bout then..
User avatar
jmadden91
Specialist 2
Specialist 2
Posts: 246
Joined: Thu May 07, 2009 6:03 pm
Location: Queensland, Australia

Wed Aug 05, 2009 6:45 am

Whole thread on them on here mate. Here's the link

http://www.spudfiles.com/forums/my-comp ... 11866.html

Here's a better pic of one owned by a member
http://i298.photobucket.com/albums/mm24 ... C02773.jpg
User avatar
twizi
Corporal
Corporal
Posts: 511
Joined: Thu Nov 27, 2008 9:04 pm
Location: up yours

Wed Aug 05, 2009 4:16 pm

very nice
dont let the cops see that
User avatar
pizlo
Corporal 3
Corporal 3
Posts: 783
Joined: Fri Dec 22, 2006 7:27 pm
Contact:

Thu Aug 06, 2009 12:50 am

For a guy who cant spell piston you do amazing work!
User avatar
ramses
Staff Sergeant 2
Staff Sergeant 2
United States of America
Posts: 1679
Joined: Thu May 29, 2008 6:50 pm

Thu Aug 06, 2009 10:37 am

wow, that looks great! now crank up the pressure!
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name :D
smexysmileyPiston
Private
Private
Posts: 7
Joined: Sat Jul 11, 2009 7:33 am

Fri Aug 07, 2009 7:50 am

ok..sweet..thanks m8
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Fri Aug 07, 2009 1:13 pm

Very well done, One question, is it breech-loading? If not, that would be something to change. Well, now that I think about it, a coaxial is kinda hand to make breechloading, but still, something to think about.
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
shadowzzz
Private
Private
Posts: 16
Joined: Thu Mar 05, 2009 1:07 pm

Fri Aug 07, 2009 4:49 pm

I am really sorry, I do not mean to take over this thread, but I have a quick off topic question, I have used the search button to no avail.

How does one install a blowgun into an endcap for piloting? Soldering ? Glue ? Seriously, I do not know :( I have no access to screw on endcaps or something...

So should I just drill a hole in the endcap, shove the blowgun in and glue or solder, will that withstand 250 psi if done properly ?


I didn't think this was worthy of a separate thread... Sorry for the inconvenience.

( this is regarding a copper and brass gun )
Post Reply