Hey guys got a quick question that is out of my electrical league so Im asking here. I recently got an old camera which parts are no longer available for and they only come up very rarely on ebay. My problem I do not have the correct power cord, I have the battery and the camera but no cord. The issue is that the battery is a 2 pin lemo connector and the camera has a 7 pin lemo connector. Im not really sure why it needs a 7pin connector for just power, it has other ports for different control and video out and the like, if you know why let me know im interested. Anyway so Im trying to figure out how to make the cord my self heres a picture of the back of the circuit board the connector is on if that helps, it appears the center pin is possibly the ground? Oh and the camera is an agema thermocam 450 incase anyone has any experience or better luck finding a circuit diagram. I got it for next to nothing and figured Id have a go at getting it to work before I sell it on for parts.
circuit question
- jrrdw
- Moderator
- Posts: 6570
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
http://www.ebay.com/sch/i.html?_nkw=age ... m270.l1313 A ebay search, the 1st listing of the battery has a cord on it. Is yours like that. Did you Google it?
Here is a link to view;
http://s807.photobucket.com/albums/yy35 ... ter=images
Can you take a picture from component side?
Get the manual:
http://flir.com/legacy/view/?id=51511
pin 1 is: + 11 to 14 VDC
pin 7 is: - (ground)
http://s807.photobucket.com/albums/yy35 ... ter=images
Can you take a picture from component side?
Get the manual:
http://flir.com/legacy/view/?id=51511
pin 1 is: + 11 to 14 VDC
pin 7 is: - (ground)