ARGHHH Pistons
-
- Specialist 3
- Posts: 343
- Joined: Thu Feb 16, 2012 5:23 pm
- Location: Leesburg
- Contact:
I am currently building a Pneumatic Pen Gun, and have been browsing the forum. I was wondering If anyone would like to tell me what i should make the piston and barrel seal out of. thanks
-sagar
-sagar
- killerbanjo
- Specialist 2
- Posts: 245
- Joined: Fri Jun 18, 2010 6:56 pm
I used hot glue for the piston and 1.5mm neoprene sheet for the piston head.
Epoxy would be better though. You could also use as solid rubber piston from a 6mm sheet like this one...
http://www.ebay.co.uk/itm/6mm-thick-neo ... 2a192ac127
Epoxy would be better though. You could also use as solid rubber piston from a 6mm sheet like this one...
http://www.ebay.co.uk/itm/6mm-thick-neo ... 2a192ac127
-
- Specialist 3
- Posts: 343
- Joined: Thu Feb 16, 2012 5:23 pm
- Location: Leesburg
- Contact:
isn't a 6mm piston too thin? also how would I make one out of epoxy. thanks
- killerbanjo
- Specialist 2
- Posts: 245
- Joined: Fri Jun 18, 2010 6:56 pm
No, should be thick enough providing your careful with the mesurments. But if your worried about not geting it perfect make an epoxy piston with a 1.5mm head, hot glue if you have to but epoxys better.
- pneumaticcannons
- Specialist 3
- Posts: 392
- Joined: Sat Oct 30, 2010 9:45 am
- Location: shite country in asia
- Contact:
Try getting ahold of rubber test tube stoppers. They work great and are more than thick enough. Then just sharpen a pipe the same size as your chamber and drill a piston out.
ramicaza <- My Youtube Channel
-
- Specialist 3
- Posts: 343
- Joined: Thu Feb 16, 2012 5:23 pm
- Location: Leesburg
- Contact:
OK thanks hopefully I won't have any problems thanks
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
Solid rubber pistons are simple and effective.
http://www.spudfiles.com/forums/mini-0- ... 20101.html
Cut from rubber sheer with a sharpened piece of chamber tubing, be careful though
http://www.spudfiles.com/forums/mini-0- ... 20101.html
Cut from rubber sheer with a sharpened piece of chamber tubing, be careful though
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Specialist 3
- Posts: 343
- Joined: Thu Feb 16, 2012 5:23 pm
- Location: Leesburg
- Contact:
how did u sharpen the tube, and were did u get rubber that thick, and a skin piston looks like a good idea
*Also would e-6000 epoxy be suitable for attaching brass parts?
*Also would e-6000 epoxy be suitable for attaching brass parts?
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
1) clamp drill in vicesagthegreat wrote:how did u sharpen the tube
2) clamp piece of chamber material in drill chuck
3) use file and sandpaper to sharpen
found it at work, but there are plenty of sources, synthetic wine corks for example.and were did u get rubber that thick
No.and a skin piston looks like a good idea
Is it actual two part epoxy though?Also would e-6000 epoxy be suitable for attaching brass parts?
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Specialist 3
- Posts: 343
- Joined: Thu Feb 16, 2012 5:23 pm
- Location: Leesburg
- Contact:
ok i got the barall attached, now i still cant find a suitable piece of rubber for a piston, have any ideas?
-
- Specialist 3
- Posts: 343
- Joined: Thu Feb 16, 2012 5:23 pm
- Location: Leesburg
- Contact:
also, can someone describe how snug the piston should be in the main housing
(srry for being noob)
(srry for being noob)
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
You should be able to move it by blowing in the pipe. For rubber, bike inner tube, some mouse pads, rubber washers, etc.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- mark.f
- Sergeant Major 4
- Posts: 3628
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 52 times
- Been thanked: 53 times
- Contact:
I'll have you know spousal abuse is a serious offense no matter which side of the ocean you live on, jack.jackssmirkingrevenge wrote:
Check a plumbing supply store. They ought to have tap washers in the thickness you need which you could cut a 6mm piston out of.sagthegreat wrote:ok i got the barall attached, now i still cant find a suitable piece of rubber for a piston, have any ideas?
-
- Specialist 3
- Posts: 343
- Joined: Thu Feb 16, 2012 5:23 pm
- Location: Leesburg
- Contact:
but mouse pads have holes in them...
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
http://www.ebay.com/itm/25Pcs-Rubber-St ... 20c2fea32a
ten bucks, loads of potential mini-pistons.
ten bucks, loads of potential mini-pistons.
No no, it's my right handI'll have you know spousal abuse is a serious offense no matter which side of the ocean you live on, jack.
hectmarr wrote:You have to make many weapons, because this field is long and short life