machined APFSDS projectiles

[Labtecpower]

Hehe, if you send your contact information through E-mail I will post them tomorrow

[jackssmirkingrevenge]

PM sent, cheers

[Labtecpower]

Hehe, this is literally going to be High Speed Steel

[jackssmirkingrevenge]

hahahaha very droll

[jackssmirkingrevenge]

Here's the latest stock:

1 ) Mild steel darts from some rod I got from an old printer, this time just under 1 ounce and heat treated

2 ) 5 x mild steel darts with aluminum tails, with a central all steel dart

3 ) 3 x all brass darts

4 ) subcalibre dart with 3/4 oz tungsten head and hollow brass tail

5 ) full calibre dart with 3/4 oz tungsten head and delrin body

6 ) mild steel dart with 4mm tungsten carbide cores

7 ) brass darts with 4mm tungsten carbide cores

8 ) steel darts made from 8.8 structural grade bolts

[wyz2285]

How did you made the sabot of n4? I mean how did you cut them in the middle? Also how did you heat treated the steel?

[Labtecpower]

Have you got my package yet? Don't know how fast they ship the stuff, but I think it should've reached epoxyland by now

[jackssmirkingrevenge]

I mean how did you cut them in the middle?

On the mill with a slitting saw:

Also how did you heat treated the steel?

In a very amateur way, heated until red hot and then thrown into a bucket of water

Have you got my package yet? Don't know how fast they ship the stuff, but I think it should've reached epoxyland by now

Not yet :-/ did you send it by registered mail?

[wyz2285]

On the mill with a slitting saw:

Thought so. Damn so many things I need and so few money
Does the same heat treatment harden a steel wire which I'm trying to make springs of and give it the flexibility?

[jackssmirkingrevenge]

Thought so. Damn so many things I need and so few money

The list of accessories never ends... but in this case, since it's for a sabot, you can just cut it with a hacksaw or use a very small diameter end mill to slit it.

Does the same heat treatment harden a steel wire which I'm trying to make springs of and give it the flexibility?

EVERYTHING you need to know about making springs: http://home.earthlink.net/~bazillion/intro.html

[Labtecpower]

On the mill with a slitting saw:

Looks nice, but do you ever clean your tools?

Not yet :-/ did you send it by registered mail?

Nope, just the cheapest option.. Maybe the sharp stuff looked a bit suspicious

Does the same heat treatment harden a steel wire which I'm trying to make springs of and give it the flexibility?

Just throwing red hot steel wire to a bucket of water isn't going to get you anywhere near a spring, you need the right type of carbon steel, and a special way of heat treating the stuff to get you even near the results your looking for. Even the quenching temperature matters with these special steels. And were not even talking about these grades of steel you could use for this.

[jakethebeast]

.. AAND continuing here (Lab wanted me to change to my own account)

Propably what you have is the cheapest crap someone may sell for you. And i know your still going to try it and come crying to us because it didn´t work at all. As i have seen how you use your tools, and in the name of natural selection, id say go for it!

[wyz2285]

Well thanks Jake tough word. Cut my hand with a saw, well yes, I was distracted. Now don't exaggerate, I won't come here crying to you. And I also know I haven't give my tools a good use yet and done nothing impressive, but I don't need you to tell me I suck and I won't give a f*ck if you do. I was once ruthless on this forum and I apologize for that, but I see I should defend myself right now. I know you know a lot about metals and knifes, I respect that and I thought you were a great person, so sorry if I just tried to find a way to make some springs as I haven't find them been sold. Yes I do buy the cheapest stuff if it will work because founds has always been a problem.

[Labtecpower]

Maybe try piano wire, just the material you're looking after.
(at least when you're not looking after coiled ones)

And try fapping with your right hand, it's pretty good for the blood flow, and thus healing your hand faster

PUI

[wyz2285]

Well I bet you and Jake have been laughing in my back for a while... I have been told about piano wires, maybe I give it a try.