Stuff's New Gun
It would be more powerful if you had a 1.5 inch tee between the chamber and sprinkler valve since it would exhaust faster. Then, you could just use a bushing or two to reduce the third hole of the tee down to 1/4. It shouldn't cost too much, and you would probably notice a big difference.
-
- Specialist 3
- Posts: 326
- Joined: Sun Oct 01, 2006 5:45 pm
- Location: Enoch, UT(next to Cedar City)
That's some kick. Sorry to restate my earlier question, but could you give me some price info on the valve discluding the exhaust and fill valves but including any parts you had lying around your house?
"Nine out of ten Americans agree that out of ten Americans one will always disagree with the other nine."
-Collin Mockery
Who's Line is it Anyway
Borrow money from a pessimist, he won't expect it back.
-Collin Mockery
Who's Line is it Anyway
Borrow money from a pessimist, he won't expect it back.
- SpudStuff
- Sergeant 5
- Posts: 1410
- Joined: Sat Dec 10, 2005 3:55 pm
- Location: Cupertino, California
- Contact:
That is a 1/2" Tee.
PVC Fittings
4" Tee - 12.99
4" FNPT Adapter - 4.99
4" SCH 80 Plug- 9.99
3" FNPT adapter - 3.99
Pipe
1' of 3" pipe - 1.89
1' of 3.5" pipe - 2.50
1' of 4" pipe - 2.89
Brass fittings
1/2"x3" nipple SCH 80 - 5.99
1/2" Tee - 1.50
1/2"x1/4" Bushing - 0.99
2x Male QC - 1.50
Female QC - 1.99
Valves
2x 1/4" Brass Valve -12
1.5" WeatherMaster 200PSI Valve - 199.99
Other Shit
Ashcroft 0-100 PSIG Gauge- 249.99
So, if you want to build the EXACT same valve as I did You will have a $513.19 hole in your wallet.
PVC Fittings
4" Tee - 12.99
4" FNPT Adapter - 4.99
4" SCH 80 Plug- 9.99
3" FNPT adapter - 3.99
Pipe
1' of 3" pipe - 1.89
1' of 3.5" pipe - 2.50
1' of 4" pipe - 2.89
Brass fittings
1/2"x3" nipple SCH 80 - 5.99
1/2" Tee - 1.50
1/2"x1/4" Bushing - 0.99
2x Male QC - 1.50
Female QC - 1.99
Valves
2x 1/4" Brass Valve -12
1.5" WeatherMaster 200PSI Valve - 199.99
Other Shit
Ashcroft 0-100 PSIG Gauge- 249.99
So, if you want to build the EXACT same valve as I did You will have a $513.19 hole in your wallet.
-
- Specialist 3
- Posts: 326
- Joined: Sun Oct 01, 2006 5:45 pm
- Location: Enoch, UT(next to Cedar City)
why in the crud would you even think of buying a $250 pressure gauge?
"Nine out of ten Americans agree that out of ten Americans one will always disagree with the other nine."
-Collin Mockery
Who's Line is it Anyway
Borrow money from a pessimist, he won't expect it back.
-Collin Mockery
Who's Line is it Anyway
Borrow money from a pessimist, he won't expect it back.
- ProfessorAmadeus
- Sergeant
- Posts: 1046
- Joined: Fri Apr 28, 2006 5:39 pm
- Location: texas
I think he gets his tuff at flee markets and gets it real cheap.
SOO CUTE!! OMG!! I COULD JUST LICK YOU!!Insomniac wrote:Hey why am I a goose???? Why not somthing a little more awe inspireing, like an eagle or something? LOL
- ProfessorAmadeus
- Sergeant
- Posts: 1046
- Joined: Fri Apr 28, 2006 5:39 pm
- Location: texas
Well If he did pay that much he's RETARDED!! I think he means if you payed full price for it, it would be that much. He probably got all his stuff really cheap like on his hybrid.
SOO CUTE!! OMG!! I COULD JUST LICK YOU!!Insomniac wrote:Hey why am I a goose???? Why not somthing a little more awe inspireing, like an eagle or something? LOL
-
- Specialist 3
- Posts: 326
- Joined: Sun Oct 01, 2006 5:45 pm
- Location: Enoch, UT(next to Cedar City)
Good point. I didn't even think about that. What wuld you use the 3.5" pipe for anyway if they indeed make it.
"Nine out of ten Americans agree that out of ten Americans one will always disagree with the other nine."
-Collin Mockery
Who's Line is it Anyway
Borrow money from a pessimist, he won't expect it back.
-Collin Mockery
Who's Line is it Anyway
Borrow money from a pessimist, he won't expect it back.
- SpudStuff
- Sergeant 5
- Posts: 1410
- Joined: Sat Dec 10, 2005 3:55 pm
- Location: Cupertino, California
- Contact:
Yes I got the valve for 2 dollars New at the flea market. Look it up for yourself, the gauge really is 250 dollars.
They do make 3.5" pipe. I got ~4 feet of it for free from the construction at my school. That was SCH 80 conduit. Then while browsing the junk store looking for a specific laser, i found 5 feet of SCH 40 stuff. It works as a 3" coupler and piston/sleeve for 4 inch SCH 40 pipe.
They do make 3.5" pipe. I got ~4 feet of it for free from the construction at my school. That was SCH 80 conduit. Then while browsing the junk store looking for a specific laser, i found 5 feet of SCH 40 stuff. It works as a 3" coupler and piston/sleeve for 4 inch SCH 40 pipe.
- MisterSteve124
- Corporal 3
- Posts: 702
- Joined: Sat Feb 11, 2006 10:11 pm
- Location: West Chester, PA
- Contact:
I ordered a ashcroft 1-160 pressure gauge from mcmaster for 9 bucks why the hell would it be 250?
AND why was the weathermaster valve 200 bucks? I'm assuming thats the sprinkler valve.
But still nice cannon it looks real nice.
AND why was the weathermaster valve 200 bucks? I'm assuming thats the sprinkler valve.
But still nice cannon it looks real nice.
- ProfessorAmadeus
- Sergeant
- Posts: 1046
- Joined: Fri Apr 28, 2006 5:39 pm
- Location: texas
Sprinkler valves over 1 inch get really expensive. I dont know why but they do.
SOO CUTE!! OMG!! I COULD JUST LICK YOU!!Insomniac wrote:Hey why am I a goose???? Why not somthing a little more awe inspireing, like an eagle or something? LOL
- MisterSteve124
- Corporal 3
- Posts: 702
- Joined: Sat Feb 11, 2006 10:11 pm
- Location: West Chester, PA
- Contact:
yes but not 200 bucks homedepot sells them for 50.