Then moved to a short "U" shaped ball valve operated mini gun.
![Image](http://img375.imageshack.us/img375/3489/firststubgunej6.jpg)
Next I added an "L" between the "U" and the chamber. Also experimented with silencers at this stage. I live next to a hospital and other that the obvious there is also coppers driving past everynow and again.
![Image](http://img181.imageshack.us/img181/7225/oldgunnd3.jpg)
And then the other night I went down to Bunnings and got a hand full of T's and 90deg's and another length of 25mm pvp pp and still using my original chamber that I fitted with a 25mm Male on the 50mm cap with 1/2 a 25mm connector on the inside to secure it. I came up with my rifle design, it is pretty chunky I think I might use some bends for my next design to get a better fit under the arm.
![Image](http://img159.imageshack.us/img159/7913/meandguniu2.jpg)
![Image](http://img49.imageshack.us/img49/7516/newgun3rz1.jpg)
Now for some damage shots. Only using paintballs at the moment.
![Image](http://img392.imageshack.us/img392/921/dmg1sd4.jpg)
![Image](http://img68.imageshack.us/img68/7771/dmg2cq2.jpg)
![Image](http://img207.imageshack.us/img207/3953/dmg8kj9.jpg)
![Image](http://img283.imageshack.us/img283/8794/dmg7ap3.jpg)
![Image](http://img283.imageshack.us/img283/8749/dmg9qq9.jpg)
-Conclusion- Don't think my dog will be drinking out of this anymore.
![Image](http://img210.imageshack.us/img210/3604/dmg3ui1.jpg)
-Conclusion- Need something thicker than 3mm MDF.
![Image](http://img47.imageshack.us/img47/7739/dmg4lw3.jpg)
-Conclusion- It takes 3 paintballs to break out the bourbon.