penetration
okay expect some pictures SOON, just need to tell my parents a story so i can post some damage pics. Due to the dark covers of the magazines, i will remove them so you can see the enter and exit holes. It might be hard because there are holes from different pressure shots. Look for the middle hole. I will also post a picture of my gun, i know the chamber has wierd proportions and im going to up grade it soon(i also shortend it). Any suggestions for displaying the carnage?
YAY i finaly got pictures, ask questions, I told you it can do this...But if you STILL think im lying, i will do a video NEXT year, because its freezing here and my whole family is coming for a week. Hope you all like the damage and my recycled parts gun!
- Attachments
-
- 3d layer of cardboard
- cardboard.JPG (11.08 KiB) Viewed 2365 times
-
- 1st magazine(not in order)
- mag 1.JPG (16.03 KiB) Viewed 2363 times
-
- 2nd mag
- mag 2.JPG (13.8 KiB) Viewed 2362 times
-
- 3d mag
- mag 3.JPG (18.36 KiB) Viewed 2361 times
-
- 4th mag
- mag 4.JPG (20.18 KiB) Viewed 2360 times
-
- 5th mag!
- mag 5.JPG (22.54 KiB) Viewed 2359 times
-
- last mag that it ricoched off
- last mag.JPG (10.42 KiB) Viewed 2358 times
-
- my long lasting gun(aprt from the trigger mechanism)
- my gun.JPG (16.76 KiB) Viewed 2354 times
-
- damage to a block of plywood. I used a pellet like the one on the left, it went in about 4 mm. The one on the right is the one i used on the magazines, MUCH BETTER PENETRATION.
- Block o wood.JPG (12.77 KiB) Viewed 2352 times
Last edited by dilweed on Fri Dec 19, 2008 5:08 am, edited 2 times in total.
-
Xxplosive42o
- Specialist
- Posts: 134
- Joined: Tue Dec 09, 2008 5:57 pm
- Location: Los Angeles, Ca.
Why did you create a seperate post for this? Just curious. 
" Forget about all the reasons why something may not work. You only need to find one good reason why it will. "
edited for double posting! 3 minutes apart!!!
SO it grabs attention
Sorry for double posting but....IM NOT LYING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!I did the best i could with the pictures it was taken with a phone camera. Ill addd some more shots at wood with bbs, pellets and darts next year, my 70 years old grandparents are comin over for christmass. I also found out you guys were right about the gage. It was shot at closely to 80 psi, i got a new one. I just thought that my updates on the gun wouldn't have changed the volume of noise, water vapour damage etc. Its MUCH more powerfull than last time.
SO it grabs attention
Sorry for double posting but....IM NOT LYING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!I did the best i could with the pictures it was taken with a phone camera. Ill addd some more shots at wood with bbs, pellets and darts next year, my 70 years old grandparents are comin over for christmass. I also found out you guys were right about the gage. It was shot at closely to 80 psi, i got a new one. I just thought that my updates on the gun wouldn't have changed the volume of noise, water vapour damage etc. Its MUCH more powerfull than last time.
-
Xxplosive42o
- Specialist
- Posts: 134
- Joined: Tue Dec 09, 2008 5:57 pm
- Location: Los Angeles, Ca.
This isn't to flame you, but rather educate you on forum policy.
1) Don’t create a separate topic for attention. This should be placed in the topic you originally posted with your cannon. It will bring your topic back up to the top. That should create enough attention by itself. People such as myself who did not see your first post will look at this in confusion.
2) Watch your double post. It's good you acknowledged it, but if you knew what you were doing was wrong then why do it....?
Next time simply edit your original post with the info! Don’t keep posting so people will look. If we want to look then we will.
Frankly, you’re bumping!
1) Don’t create a separate topic for attention. This should be placed in the topic you originally posted with your cannon. It will bring your topic back up to the top. That should create enough attention by itself. People such as myself who did not see your first post will look at this in confusion.
2) Watch your double post. It's good you acknowledged it, but if you knew what you were doing was wrong then why do it....?
Next time simply edit your original post with the info! Don’t keep posting so people will look. If we want to look then we will.
Frankly, you’re bumping!
" Forget about all the reasons why something may not work. You only need to find one good reason why it will. "
And how do we know that you didnt shoot the 5 magazines one by one?
Sorry dude
But we will need a vid of you doing it again to prove this.
You can do this again cant you? I mean, a lucky shot, okay; but a lucky shot that does 500% of the normal damage?! No way.
Sorry dude
But we will need a vid of you doing it again to prove this.
You can do this again cant you? I mean, a lucky shot, okay; but a lucky shot that does 500% of the normal damage?! No way.
DAM! this is getting really anoying listen please - THE MAGAZINES I SHOT AGAINST ARE REALLY WEAK. WHEN I SHOT AGAINST A COSMETICS MAGAZINES IT EMBEDED IT'S SELF IN IT(198 pages in). I will do it again later. NEXT IM GOING TO DO A MOVIE, BUT DONT EXPECT IT RIGHT AWAY. My grandparents will be over and they wont want to hear or see me shoot guns! okay gah!!!! How many pages in a flimsy sh@tty quailty magazine can your guns shoot into? As i said, with "The Week" magazines it can go roughly in 300 pages. With a fixed gage the shots are done at 80 psi. At 180psi( I can go to 240 on my bike pump) I can shppt through 12 layers of cardboard with the same pellet. After i post a movie will you believe me? - SHOOT ME GOD, PLEASE! *red dot appears on forehead*
-
frankrede
- Sergeant Major 2
- Posts: 3220
- Joined: Thu Jul 20, 2006 9:47 pm
- Has thanked: 1 time
- Been thanked: 1 time
Fair enough man, they all don't believe you but I do.
@Xxplosive42o, your quote says....
" Forget about all the reasons why something may not work. You only need to find one good reason why it will. "
I think that this is most appropriate in this situation.
@Xxplosive42o, your quote says....
" Forget about all the reasons why something may not work. You only need to find one good reason why it will. "
I think that this is most appropriate in this situation.
Current project: Afghanistan deployment
I mean come on im even telling you what magazines i shot against, so you could try! I told you there was a problem with the gage that i just fixed. I didn't realize it because the shot i did seemed different from the ones from my last gun.
How is 12 layers of cardboard extreme penetration ?
A spring loaded ballvalve canon with the right projectile could puncture 3mm steel plate at 240psi probably even 180.
But I do agree this whole I'M NOT LYING !!!!!!!!!(...)!!!! and double posting will probably get people frustrated quite quickly.
A spring loaded ballvalve canon with the right projectile could puncture 3mm steel plate at 240psi probably even 180.
But I do agree this whole I'M NOT LYING !!!!!!!!!(...)!!!! and double posting will probably get people frustrated quite quickly.
Its very unreal at 18 psi you stated in your last thread.dilweed wrote:no people thought a pellet shot through 5 magazines, 3 layers of cardboard and ricocheting of a cosmetics magazine is unreal.
mobile chernobyl wrote:I can shoot a Canuter Valve off my '82 Chevy Ram F150 AT LEAST 3/4 Mile with 'ma cannon made of soup cans duct taped together, then I just squirt some bacardi 151 in the chamber and hold up my cigarrete lighta and WHOOSH! That thing flies at least 3/4 mile
Oh, with pics it seems a little clearer. Ok, i believe you. and, sorry for the gauge man, but that was obvious. Theese things cost a lot...... 
Nice cannon! next time, shoot a homemade lead slug! cant beat kinetic energy ^^ (well.....)
Nice cannon! next time, shoot a homemade lead slug! cant beat kinetic energy ^^ (well.....)
"J'mets mes pieds où j'veux, et c'est souvent dans la gueule."
thank you, I have finished making a clay mould. Is calibers are:
-6mm roundball
-.35 roundball
-.64 roundball
All of these will be shot with a VERY fast opening valve at 300 psi. The metals i will try to use are lead or aluminium. Im also going to buy bronze rods for my 6mm barrel, dril holes in the backs and file a rounded, flat or pointed tip.
Also at the point of 18 psi not being believable, my gage said it but if sorted things out.( i tested it in cold weather) I just didn't think the pressure was higher because my last gun was much more powerfull, but lacking on the cosmetics. And for a power comparason, 5 of the magazines I shot against is about equivelent to embedding the pellet 3/4 into a plywood block.
Another thought, compared to a human layer of muscle, skin tissue how dense is a block of fresh clay? How dense is a straw archery backstop? Would tests be compareable?
-6mm roundball
-.35 roundball
-.64 roundball
All of these will be shot with a VERY fast opening valve at 300 psi. The metals i will try to use are lead or aluminium. Im also going to buy bronze rods for my 6mm barrel, dril holes in the backs and file a rounded, flat or pointed tip.
Also at the point of 18 psi not being believable, my gage said it but if sorted things out.( i tested it in cold weather) I just didn't think the pressure was higher because my last gun was much more powerfull, but lacking on the cosmetics. And for a power comparason, 5 of the magazines I shot against is about equivelent to embedding the pellet 3/4 into a plywood block.
Another thought, compared to a human layer of muscle, skin tissue how dense is a block of fresh clay? How dense is a straw archery backstop? Would tests be compareable?
-
jrrdw
- Moderator
- Posts: 6572
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
Check your PM!Xxplosive42o wrote:This isn't to flame you, but rather educate you on forum policy.
1) Don’t create a separate topic for attention. This should be placed in the topic you originally posted with your cannon. It will bring your topic back up to the top. That should create enough attention by itself. People such as myself who did not see your first post will look at this in confusion.
2) Watch your double post. It's good you acknowledged it, but if you knew what you were doing was wrong then why do it....?
Next time simply edit your original post with the info! Don’t keep posting so people will look. If we want to look then we will.
Frankly, you’re bumping!