Difference between revisions of "Pilot valve"
| Line 1: | Line 1: | ||
| − | + | A '''pilot valve''' is the valve used to release the air from behind a [[diaphragm valve|diaphram]] or [[piston valve]], causing it to open. It can vary in flow from a [[schrader valve]] to a 2" [[ball valve]] and above. Small diaphragm and piston valves are also sometimes used as pilots for bigger valves. | |
| − | * "[[honking]]" of the valve. This loud noise indicates that your valve is | + | |
| + | [[Blowgun]]s are commonly used as pilot valves since they are easy to open by hand, and many have a trigger grip that fits well into the design of a gun. | ||
| + | |||
| + | Some problems that indicate the need for a higher flow pilot valve: | ||
| + | * "[[honking]]" of the valve. This loud noise indicates that your valve is oscillating open and closed. | ||
* A 'dull' sounding launch. (note that this does not apply in the case of a [[chamber to barrel ratio]] near optimum, because there isn't much energy left over to make a loud "crack".) | * A 'dull' sounding launch. (note that this does not apply in the case of a [[chamber to barrel ratio]] near optimum, because there isn't much energy left over to make a loud "crack".) | ||
| − | * | + | * [[GGDT]] simulation indicates that your perfomance would be improved with a larger valve. |
Revision as of 13:21, 24 October 2005
A pilot valve is the valve used to release the air from behind a diaphram or piston valve, causing it to open. It can vary in flow from a schrader valve to a 2" ball valve and above. Small diaphragm and piston valves are also sometimes used as pilots for bigger valves.
Blowguns are commonly used as pilot valves since they are easy to open by hand, and many have a trigger grip that fits well into the design of a gun.
Some problems that indicate the need for a higher flow pilot valve:
- "honking" of the valve. This loud noise indicates that your valve is oscillating open and closed.
- A 'dull' sounding launch. (note that this does not apply in the case of a chamber to barrel ratio near optimum, because there isn't much energy left over to make a loud "crack".)
- GGDT simulation indicates that your perfomance would be improved with a larger valve.
