adapter question
just wondering what the most common adapter used is. cause i have one thats very slight and i saw one that was a huuugee change and i wasnt sure if it was to powerful and i didnt see anything inbetween. so whats the most common fitting?
Obsolescecne is just a lack of imaginaiton-www.accrc.org
-
Pete Zaria
- Corporal 5
- Posts: 954
- Joined: Fri Mar 31, 2006 6:04 pm
- Location: Near Seattle, WA
I see mostly 4" to 2", 3" to 2", and 3" to 1.5" fittings.
Using a coupler and reducing bushing is the "right" way to do it, since 90% of reducer adapters aren't pressure rated.
I use a 4" to 2" on my over/under metered propane gun, and then a threaded 2" - 1.5" at the breech (for interchangeable barrels).
Peace,
Pete Zaria.
Using a coupler and reducing bushing is the "right" way to do it, since 90% of reducer adapters aren't pressure rated.
I use a 4" to 2" on my over/under metered propane gun, and then a threaded 2" - 1.5" at the breech (for interchangeable barrels).
Peace,
Pete Zaria.
-
CannonCreator
- Specialist 3
- Posts: 314
- Joined: Sun Aug 12, 2007 12:59 pm
- Location: Moorpark, CA
- Contact:
I also use 4 to 2 adapters for me cannons, they are most common in the harware stores, and they give you good results, distance wise, when use a 4 to 2 reducer bushing on a 4" chamber to a 2" barrel.