For my new air cannon, which I will post this weekend when I finish it, is going to shoot these cement slugs I made. Pretty straight forward, cut pvc lengths diameter of your barrel and fill with quikrete cement.
What would be the best way to make the slugs have a semi-pointed tip like a nosecone of some sort after they dry? this would make them fly faster, farther, and straighter it seems like.
Cement molds and making cement slugs
what about forming a cone out of aluminum foil in a hole in the ground, stick the pvc over it, and fill?
What about the wear you'll be causing on your barrel? Maybe you should make sort of a liner in the PVC out of plastic wrap before filling with concrete.
What about the wear you'll be causing on your barrel? Maybe you should make sort of a liner in the PVC out of plastic wrap before filling with concrete.
I'm weird, I know it, you don't need to tell me.
-
Novacastrian
- Staff Sergeant 2
- Posts: 1603
- Joined: Sat Aug 11, 2007 6:59 pm
- Been thanked: 1 time
Look at this thread-
http://www.spudfiles.com/forums/pimpin-ammo-t9989.html
Near the end pages are some hot glue rounds.
http://www.spudfiles.com/forums/pimpin-ammo-t9989.html
Near the end pages are some hot glue rounds.
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
-
Novacastrian
- Staff Sergeant 2
- Posts: 1603
- Joined: Sat Aug 11, 2007 6:59 pm
- Been thanked: 1 time
Cement is a term used to describe a lot of glues benny
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
-
spudgunnerwryyyyy
- Specialist 2
- Posts: 261
- Joined: Thu Jul 12, 2007 10:54 pm
Yes but he also mentioned quickcrete which definatley
would screw up your barrel, but hey pvc is uber cheap.
would screw up your barrel, but hey pvc is uber cheap.
The Doors are awesome, Led Zeppelin is amazing, and Motley Crue kicks @$$.
Go Orange Box
RAP SUCKS
Go Orange Box
RAP SUCKS
Use a wooden dow or rebar and a funnel.
Stick the wooden dow or rebar through the smaller hole in the funnel and then pour the concrete mix around that. Once it's cured you can cut or grind the dow/rebar off to a point after you push the slug out of the funnel.
A concrete slug travelling down your barrel at several hundred (hopefully) FPS will grind that baby down in a heartbeat.. So it better be smooth as a babies crack.
Stick the wooden dow or rebar through the smaller hole in the funnel and then pour the concrete mix around that. Once it's cured you can cut or grind the dow/rebar off to a point after you push the slug out of the funnel.
A concrete slug travelling down your barrel at several hundred (hopefully) FPS will grind that baby down in a heartbeat.. So it better be smooth as a babies crack.
-
Novacastrian
- Staff Sergeant 2
- Posts: 1603
- Joined: Sat Aug 11, 2007 6:59 pm
- Been thanked: 1 time
Yeah lets put abrasive slugs through our highly VALUABLE barrels.spudgunnerwryyyyy wrote:Yes but he also mentioned quickcrete which definatley
would screw up your barrel, but hey pvc is uber cheap.
Sounds like a GREAT idea to me.
By the way i'm being sarcastic.
Surely you can think of a better material to use than bloody concrete
Why not try aa batteries or some such.America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
-
silverdooty
- Specialist
- Posts: 102
- Joined: Mon Aug 06, 2007 8:52 pm
- Location: old folks home
cone shaped dixie cups with a washer in the base, then fasten it to you mold and fill with something else other than quikrete. it is too abrasive.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
Having a pointed nosecone won't have them flying any straighter, to achieve this you need a hollow tail - here's a suggestion on how to achieve it.
- Attachments
-
- casting.JPG (17.17 KiB) Viewed 5046 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
spudgunnerwryyyyy
- Specialist 2
- Posts: 261
- Joined: Thu Jul 12, 2007 10:54 pm
Go jsr, that us exactly what i was thinking. Now we could make a pointed tip made out of epoxy. w00t
The Doors are awesome, Led Zeppelin is amazing, and Motley Crue kicks @$$.
Go Orange Box
RAP SUCKS
Go Orange Box
RAP SUCKS
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
To make a pointed tip all you have to do is add another cup to the top of the pipe with a hole on top to pour the concrete through, why waste precious epoxy 
hectmarr wrote:You have to make many weapons, because this field is long and short life