I want to build a stock for my gun. does anyone have an easy way to make one. I have almost no way to work on wood other than a saw. this is the gun i want to put it on.http://www.spudfiles.com/forums/pat123s ... 13786.html
thanks,
pat
building stock for gun
why not just cut a rough shape of the stock from wood, then sand it down. i know its time consuming but you can customize it easier to suit your needs.
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
-
rcman50166
- Corporal 2
- Posts: 697
- Joined: Sat Jan 19, 2008 7:11 pm
- Location: Bethel, CT
- Contact:
Use PVC. Most of a stock is cylindrical anyway.
I might do that I don't knowhow I will attach it. the spark plug and schrader are on the back.
maybe I could use pvc then cut a slit in it for thin wood
you could just drill (if you have a drill) out a hole to encase the spark plug about 2-3" deep, then put a hose clamp around that to secure it. ill draw up a diagram of what i mean...
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
I think I get it. How thick of a piece of wood would I need. 3" maybe?
yeah, 3" minimum
almost done with the diagram
almost done with the diagram
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
done! ask if you don't understand something.
- Attachments
-
- stock.JPG (36.26 KiB) Viewed 3438 times
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
ok thanks the only thing I don't uderstand is what is the gray area with the slanted lines and how should I attach it
that would be the hose clamp. the hose clamp should keep it in place if you drilled the hole accurately enough. and if it doesn't fit perfectly, i would suggest stuffing foam in there, then using a hose clamp.
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
Sthorne- I may try that. it is going to take a long time to sand that down.
-
Jared Haehnel
- Corporal 2
- Posts: 611
- Joined: Tue Feb 19, 2008 4:15 pm
- Location: White River Jct, Vermont
If I were you I would see if I couldn't arrange things in a so it was a bit more compact. I would be easier to handle and the stock would probably be easier to make...just a thought...
My current projects....
Currently buying part for...
http://www.spudfiles.com/forums/my-new- ... rt,15.html
Still on the drawing board...
C02 tank hybrid
Screen doors for submarines...
Currently buying part for...
http://www.spudfiles.com/forums/my-new- ... rt,15.html
Still on the drawing board...
C02 tank hybrid
Screen doors for submarines...
The only way to do that would be to have an over under. I don't want an elbow that close to my head with 500+ psi in it.[If I were you I would see if I couldn't arrange things in a so it was a bit more compact. I would be easier to handle and the stock would probably be easier to make...just a thought...