stirrup pump

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2504
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Sat Feb 07, 2009 2:31 pm

john bunsenburner wrote:Well i weight 65kg and need about 50bar

50*14.5=725

725/25=29

143/29=4.9=>5


I would need a 5mm pump bore to get 50bar@65kg if i used all my body weight...

Hmmm, no.

As I prefer to work in psi,

You weigh 65kg, that's 143 pounds.

You want 50 bar or 725psi.

143pounds/725psi = .1972 in.sq.

pi*r*r = .1972 in.sq. so r=.2505"

Diameter = 2*r so D=.501"

You need a piston bore of ~ .5 inches, not 5 mm.
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
john bunsenburner
Sergeant 5
Sergeant 5
Posts: 1446
Joined: Sun Oct 19, 2008 5:13 am

Sat Feb 07, 2009 2:33 pm

Sorry, i should REALLY think about my maths before doign it... and i can get the needed pressure with a 1cm bore pump easyly(yes i know its 1.2cm but i prefer 1 cm, easyer to work with)
"Did you ever stop to think that out of the seven deadly sins envy is the only one which doesn't give the sinner even momentary pleasure"-George Will
User avatar
roughboy
Specialist
Specialist
Posts: 197
Joined: Fri May 12, 2006 12:43 am

Sat Feb 07, 2009 2:38 pm

which is better to build a floating o ring stirrup pump or a 2 check valve on the bottom pump?

and which style of pump can give more higher pressure?
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2504
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Sat Feb 07, 2009 2:50 pm

With the piston at the bottom of the cylinder, the less volume between the piston face, and the check valve, the better.

Think of it like this,

If your pump cylinder has a volume of 10 cu.in. , and you have 1 cu.in dead space in the "pump head", you have a compression ratio of 10:1 .

This means that in "theory" you could compress the air 10 times to 145psi max.

If you cut the dead space to .1cu.in. , then the compression ratio goes to 100:1 with an attendant increase in theoretical maximum pressure.

Now, bore size comes into play, as you have only so much mass to throw around.

See previous post.

To sum up,

Regardless of bore size and the weight you have to put onto the piston head, if you utilize a "largish" dead space design, you limit the compression ratio, and the ability of the pump to create pressure.

The floating o-ring design is better IMHO.


:)
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Sat Feb 07, 2009 3:06 pm

Actually, there is a third option. My pump has fixed O-rings, and only one check valve (I started with two, then swapped down to one).

The trick is a vent hole in the side of the pump shaft. Once the pump is pulled back past it, it lets the air in and does it's job.

Fair enough, you have to pull the pump back against a vacuum, but as it can be no more than -14.7 psi relative (which it won't reach anyway, as there is always some dead volume), it's not hard to do that.

You can see said hole approximately 8 inches down the cylinder in this picture. Dead centre (to use the bricks in the background as a scale) of the third complete brick.

Not easy to see if you're not looking, I admit, but it's there.
Does that thing kinda look like a big cat to you?
User avatar
roughboy
Specialist
Specialist
Posts: 197
Joined: Fri May 12, 2006 12:43 am

Sat Feb 07, 2009 3:09 pm

what should i use for the body if i can't get my hands on copper pipes? PVC or galvanized steel pipe?
User avatar
john bunsenburner
Sergeant 5
Sergeant 5
Posts: 1446
Joined: Sun Oct 19, 2008 5:13 am

Sat Feb 07, 2009 3:12 pm

The steel will hold alot mor epressure and is safer, i woudl go for that!
"Did you ever stop to think that out of the seven deadly sins envy is the only one which doesn't give the sinner even momentary pleasure"-George Will
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Sat Feb 07, 2009 3:20 pm

Galvanised pipe may not have an interior smooth enough to use. That is not to say that it won't, but there's no guarantee it will either.

Personally my recommendation is that if you can't get your hands on copper, you look harder. ;)
It is generally the best material for home-made pumps.
Does that thing kinda look like a big cat to you?
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

Donating Members

Sun Feb 08, 2009 8:06 am

The steel will hold alot mor epressure and is safer, i woudl go for that!
Copper can be used up to 500 psi. So if he wants a pump that goes up to 500, then copper is just fine.
Aluminum could also be used.
BTW You should learn to use the spell check. I'm using the firefox spell check plugin and I highly recommend it.


Ragnarok, interesting that you used a mechanism that simply pulled vacuum. It is however, lifting 3.2 kilograms every stroke so it would be something you feel in your arms at the end of the day. But on the other hand, its some extra exercise.

Besides pulling vacuum most people go with a floating O-ring (minimized dead space while not pulling vacuum.) But using 2 check valves at the bottom has some use too. It may create some extra dead volume, but it does allow you to use the pump as a vacuum pump.


A little hijack: I might make an homemade compressor by building a stirrup pump like this and attaching a crank + motor. It would have to go up to 60 bar as I already have a fridge compressor which goes up to 30. Now the question is: Would I use a full-length pump with one heck of a crank mechanism or use a shorter stroke pump, being much more compact though having more problems with dead space. Note that I have access to a machine shop for this.
Till the day I'm dieing, I'll keep them spuddies flying, 'cause I can!

Spudfiles steam group, join!
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Sun Feb 08, 2009 8:41 am

psycix wrote:Ragnarok, interesting that you used a mechanism that simply pulled vacuum.
In theory, it has the highest pressure potential. In practise, it was an easy solution to one of the check valves buggering up.
It is however, lifting 3.2 kilograms every stroke so it would be something you feel in your arms at the end of the day.
You clearly have no idea what my working backpack weighs.
Heck, I think the laptop alone is 3.8 kilos. (Screw those 3 lb Macbooks.)
Add in the spare batteries, and my books... it's a lot more.

Also, those 3 and a bit kilos is fairly irrelevant compared to the compressive forces.
Does that thing kinda look like a big cat to you?
User avatar
john bunsenburner
Sergeant 5
Sergeant 5
Posts: 1446
Joined: Sun Oct 19, 2008 5:13 am

Sun Feb 08, 2009 9:48 am

psycix i woudl use a smaller more compact cranck mech and maybe hook up two small pumps, its just easyer than trying to find a place for a 1m monster. Also the common motor(i suspect you are goign for a washign machine motor) has a fairly high rpm and so even if you shorten the pump it will still be pretty swift, i recomend you hook either your fridge or you workshop compressor onto it to make things faster.

P.s. Heck even my school bag weighs around 15kg, and i definately prefer pumping up my gun than doing pull ups... :twisted:
And go knows maybe you could even get people to do it for you, just paint you pump, stick it into a fitness room and put some instructions next to it, then attach the pump to a very large tank from which you take air as needed. :D
"Did you ever stop to think that out of the seven deadly sins envy is the only one which doesn't give the sinner even momentary pleasure"-George Will
User avatar
sputnick
Specialist 4
Specialist 4
Posts: 498
Joined: Sun Dec 14, 2008 3:53 pm
Location: Ontario Canada

Sun Feb 08, 2009 11:06 am

I like johns idea, we shall call it, the pumpflex! all we have to do is put some carbon rods behind it to make it look legit, and then you have people lining up to try it... it cannot fail! except for when no one vents the pressure or you don't have time to go shooting one week, and the enormous tank explodes... but apart from that hell yea!
Image


Add me on MSN to chat about whatever!
User avatar
john bunsenburner
Sergeant 5
Sergeant 5
Posts: 1446
Joined: Sun Oct 19, 2008 5:13 am

Sun Feb 08, 2009 11:16 am

safety pop of valve is you answer...hmm i made a deal with a bording school to breed fish in their pool, maybe this is another little project of mine!
"Did you ever stop to think that out of the seven deadly sins envy is the only one which doesn't give the sinner even momentary pleasure"-George Will
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

Donating Members

Mon Feb 09, 2009 11:03 am

Hahah lets start a fitness center where every movement of the people is used to compress air.
Till the day I'm dieing, I'll keep them spuddies flying, 'cause I can!

Spudfiles steam group, join!
User avatar
Brian the brain
Moderator
Moderator
Netherlands
Posts: 3497
Joined: Mon Dec 05, 2005 2:06 am
Location: Holland
Been thanked: 7 times

Mon Feb 09, 2009 5:39 pm

And keep our teeth...

Appearance is everything these days...

I suggest you get a GOOD fridgepump as that will put out 60 bar.

Perhaps you should borrow mine to try it out on your....most dangerous thing I've ever seen before my latest creation...

We need to go and shoot Mr. Porter some time anyway..
Post Reply