Tennis ball cannon
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
You'll need a 2.5" barrel, hard to come by in a store so you might have to buy online from one of Spudfiles' sponsors.reedfe wrote:I'm wondering if anyone has plans for a tennis ball cannon. I'd prefer a pneumatic cannon but combustion would work just as well. I'm already looking for a summer project
Apart from that, you can make the cannon anyway you want. Look through cannons in the showcase section, all you need to do is a put a tennis ball barrel on a cannon to make a tennis ball cannon. Goodluck.
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Reed just make a big chamber and get a big sprinkler and add a 2.5" barrel... Then it's off au Canada! 

OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
http://www.spudfiles.com/forums/old-sch ... 14208.html
Heres a simple one or you can make a piston valve, Mr.Crowley has instructions for a 2 inch one here http://www.instructables.com/id/Golfbal ... That-Shoo/
All you have to do is put a 2.5 inch barrel on it, check your local pvc supplier if you have one since lowes does carry it
Edit- Beat by a minute and Id go with a sprinkler valve as a blowgun may not work if you dont have a small enough pilot volume
Heres a simple one or you can make a piston valve, Mr.Crowley has instructions for a 2 inch one here http://www.instructables.com/id/Golfbal ... That-Shoo/
All you have to do is put a 2.5 inch barrel on it, check your local pvc supplier if you have one since lowes does carry it
Edit- Beat by a minute and Id go with a sprinkler valve as a blowgun may not work if you dont have a small enough pilot volume
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Reed a blowgun pilot would be decreasing your gun's full power. A 2" piston would be best piloted by a modded sprinkler or something.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 7 times
A blow gun would only work with a small pilot volume, o-ringed piston, and near perfect construction. It can be done, JSR pilots his biggest through a schrader, but that cannon was built to high tolerances. If you really want that trigger like feel, pilot with a SV or smaller piston valve/QEV