New gun
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
So is my current design good?
- Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
i read a couple pages back you typed you need a pipe 500psi max. just wanna see what pressure are you planing to run this at. because even 100psi can be very dangers if your not careful.
and with your last valve drawing are the seals on the rod or on the valve body?
and with your last valve drawing are the seals on the rod or on the valve body?
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
My air tank is 656 PSI max, so around 500? The seals are on the rod, Probably gonna be a rubber washer or something
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
Proepoxy xD, epoxy putty that hardens to something as hard as STEEL
- Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 6 times
what keeps air from just going out the back of your valve? Why don't you just buy a pushbutton valve off of McMater-Carr?
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
Why won't it work?How can I make it work? How can I make the seal in front not blow away?
Oh, and problem solved xD
Oh, and problem solved xD
- Attachments
-
- gaa.PNG (11.8 KiB) Viewed 2255 times
- Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 6 times
your seals are definitely going to blow off if all you're doing is epoxying washers in place. For a design like this you'd need orings and oring grooves
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
- Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
Same as o ring gland.
- Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 6 times
Have you done any searching on the website or even google? The bulk of the questions you have in this thread could be answered if you did a little of your own work
- Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
Spoon feed..
O ring gland.. the slot in which the o ring resides.
Properly designed and when placed inside a cylinder, it prevents the o ring from blowing off the piston, or rod.
O ring is too big to fit through the space between the piston and cylinder wall. This keeps the ring from blowing off.
O ring gland.. the slot in which the o ring resides.
Properly designed and when placed inside a cylinder, it prevents the o ring from blowing off the piston, or rod.
O ring is too big to fit through the space between the piston and cylinder wall. This keeps the ring from blowing off.
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
Only results when I searched up o ring was deals, a what is an o ring page and a crap load of store, and I basically get it, its like a space that the oring can fit into, but can't get out of once sealed. Also, the seal will have to be an o ring? I was thing of wall->o-ring-> washer to minimize air leakage, I'll create some sort of enclosure for so they all wouldn't blow away
I just ordered the parts
4279T123 Basic Aluminum (alloy 3003/3105) .040" Thk,12"x24",painted,one Side Black One White 1
Each 0 1 $27.59
Each $27.59
89965K223 Aluminum Tubing 3/8" Od, .277" Id, .049" Wall Thickness, 3' Length 1
Each 0 1 $8.27
Each $8.27
89965K67 Aluminum Tubing 1" Od, .93" Id, .035" Wall Thickness, 6' Length 1
Each 0 1 $19.16
Each $19.16
I'm so excited
I just ordered the parts
4279T123 Basic Aluminum (alloy 3003/3105) .040" Thk,12"x24",painted,one Side Black One White 1
Each 0 1 $27.59
Each $27.59
89965K223 Aluminum Tubing 3/8" Od, .277" Id, .049" Wall Thickness, 3' Length 1
Each 0 1 $8.27
Each $8.27
89965K67 Aluminum Tubing 1" Od, .93" Id, .035" Wall Thickness, 6' Length 1
Each 0 1 $19.16
Each $19.16
I'm so excited