I need about a foot of 5" I.D. pipe (metal, plastic.. it doesn't matter). Most metal fabrication and supply stores have a minimum order and I've tried places like this one but they never get back to me when contacted.
Does anyone know of a good supplier with no minimum order?
Source for low quantity specialized pipe
-
Labtecpower
- Sergeant 3
- Posts: 1297
- Joined: Sat Feb 20, 2010 6:38 am
- Location: Pyongyang
- Has thanked: 5 times
- Been thanked: 13 times
ummm... scrapyard?
lots of stuff lying around. I think that there's a big chance of finding what you need.
If I would need such a short pipe I would roll one out of sheet metal and weld it.
lots of stuff lying around. I think that there's a big chance of finding what you need.
If I would need such a short pipe I would roll one out of sheet metal and weld it.
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
I would check lowes for a plastic pvc 5" pipe. American Plumbing here in Birmingham could possibly have it.
-
clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
My local plumbing supply store has a giant pile of scraps that people have left after the took the pipe they needed. Id look around for a plumbing supply store and ask if they have any scraps. I got 7 feet of 1.5 inch sdr21 pipe for under 2 bucks. This is for plastic. What do you need it for if you dont mind my asking. Plastic will be cheaper but if it for any pressure would got with metal as its hard to find pressure rated 5 inch pipe.
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Ok Jimmy, I asked my grand father if he knows where I can get any. He said he has some but I will have to pull it off a machine and yeah.. Shipping will be more expensive than you driving here, so you decide. Its steel 5" ID pipe, and I can cut it to 1' if you need me to.
-
Secret Squirrel
- Private 3
- Posts: 54
- Joined: Sun Aug 08, 2010 12:24 pm
If the barrel is 4in. PVC you could use a repair coupling like this. It's like a normal coupling without the nub in the middle that the pipe seats against. You could always just grind out the nub from a normal 4in. coupling instead.
-
Moonbogg
- Staff Sergeant 3
- Posts: 1736
- Joined: Mon Oct 13, 2008 10:20 pm
- Location: SoCal
- Has thanked: 165 times
- Been thanked: 102 times
I can vouch for onlinemetals.com being a great unlimited small quantity provider, and they cut to any length as well with good prices. They are my go-to aluminum store.
-
clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
Id use metal if all all possible. You've got some good links, good luck.