Building or modifying BB, Airsoft, and Pellet type of guns. Show off your custom designs, find tips and other discussion. Target practice only!
-
mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
Sun Jul 31, 2011 10:04 am
You should get one from mcmaster. by the time you pay for shipping it will be the same price and if you order from mcmaster you will have your valve the next day if you order early enough in the morning!
Free shipping from hong kong equals you will get your valve in a month!!!!
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Sun Jul 31, 2011 10:10 am
If you order from mcmaster it would be about 10 dollars more, so you choose faster shipping and a good valve from mcmaster for 10 dollars more or the other valve and probably slower shipping for 10 dollars less. I'd spend 10 less dollars 8)
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Sun Jul 31, 2011 10:43 am
Included with the 10 dollars less, a valve that has been used at high pressures such as 500 psi.
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Sun Jul 31, 2011 10:49 am
Warhead makes a good point. I've never heard of the mcmaster diaphragm type QEVs being used at high pressure.
-
jhalek90
- Specialist 4
- Posts: 498
- Joined: Fri Aug 14, 2009 5:37 pm
Sun Jul 31, 2011 11:04 am
Gun Freak wrote: I've never heard of the mcmaster diaphragm type QEVs being used at high pressure.
I used mine up to 250 once. it survived, but i can promise yours will. Like i said that was for 1 shot at 250 psi.
jackssmirkingrevenge wrote:I wonder... if you put flammable vapours inside a lady... could you get her to diesel?
POLAND_SPUD wrote:Anything is possible with the proper 3-way valve.
-
Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 7 times
Sun Jul 31, 2011 11:22 am
Gun Freak wrote:Warhead makes a good point. I've never heard of the mcmaster diaphragm type QEVs being used at high pressure.
I have, I found 150 bar is the breaking point for the diaphragm in the 1/4" ones
I love lamp
-
mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
Sun Jul 31, 2011 11:42 am
Hmmmmmmmmmmmmmm?? Are those valves found on E-bay serviceable though??? It does not look like they are. The deltrol brand mcmaster sells are!! If you needed to put in a new o ring or diaphram you could!!
-
Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
Mon Aug 01, 2011 1:42 am
mattyzip77 wrote:You should get one from mcmaster. by the time you pay for shipping it will be the same price and if you order from mcmaster you will have your valve the next day if you order early enough in the morning!
Free shipping from hong kong equals you will get your valve in a month!!!!
He's from ''austrlia'' and Mc master don't ship.
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
Mon Aug 01, 2011 8:01 am
jmez1996 wrote:Yeah I may go for the McMaster one but they don't ship to Australia
Go for
this one. I doubt it will take more than a couple of weeks to arrive, it will probably be sent by small packet airmail.
hectmarr wrote:You have to make many weapons, because this field is long and short life
