Stealth Sniper

noname · Sun Sep 10, 2006 8:43 pm

Stealth Sniper
Pneumatic
Chamber Size 1.5"x20" (~30 CI)
Barrel Size .696"x30" (~21 CI)
Bike Pump
Modified 1" Sprinkler with Safety Ball Valve
Functional Suppressor, Chamber diagonal to the barrel

I believe this sucker is my best looking gun so far. The barrel is exactly 1 yard with the suppressor attached. The paintjob is pretty cool, black with red accents. The trigger has a ball valve safety on it. I might make a bi-pod for it, because it will look cooler and the suppressor weighs about 4 times as much as the whole barrel and it makes the barrel bend down. The stock is plugged with a piece of 3/16" thick rubber with sealant around it. Anyway,

ProfessorAmadeus · Sun Sep 10, 2006 9:43 pm

Very nice!! I like the stock and how the chambers to the side of the barrel. Its quite an original design and the paint looks good.

Benny · Sun Sep 10, 2006 9:48 pm

Really clea mate!
Does the silencer (whoops i meant "barrel extender"

) Really work?

Velocity · Sun Sep 10, 2006 9:50 pm

cool

One question: why not use a piston valve over a sprinkler valve?

Check out my YouTube SpudGun Channel! · Mon Sep 11, 2006 3:44 am

is it really worth it on a sniper?and sprinklers are easier to use on snipers as you dont need a hose and stuff to bring the trigger in front of you where a piston is behind you.and he has a stock.i cant believe i didnt see this till now,nice gun noname

killagorrila99 · Mon Sep 11, 2006 4:20 am

Damb nice gun. On averige how far does it shoot?

mark.f · Mon Sep 11, 2006 4:59 am

Piston valve = higher FPS though.

Nice gun, btw.

schmanman · Mon Sep 11, 2006 5:19 am

nice gun. I like the stock. the paint job is nice, too.

rna_duelers · Mon Sep 11, 2006 5:58 am

Yeh congrats on the nice cannon i like how the chamber is off set to the side.I had the same problem with my sniper,the barrel bending so i got a piece of 1inch pipe and had it go 3/4 the length of the barrel it worked a charm and all i did was pack the barrel out with some tape to make the 1inch pipe fit.Give it a go and let me see if it works well.

Check out my YouTube SpudGun Channel! · Mon Sep 11, 2006 2:35 pm

markfh11q wrote:Piston valve = higher FPS though.

Nice gun, btw.

yeah im just saying that on a sniper a piston is more difficult and limits your design and can get in the way if you have a stock,a piston kicks a sprinklers arse anyday

noname · Mon Sep 11, 2006 6:53 pm

Wow that's a lot of replys.
Rmich-I used a sprinkler because I had it lying around.
Benny-It helps some, takes out probably 3/4 of the sound.
Killagorilla-It's kind of hard to see paintballs going around 500 fps, wouldn't you say?
rna-duelers-I would, but that wouldn't do much for the aesthetics. I'm just going to make a folding bipod out of aluminum.

The chamber was set to the side because it was more compact. I don't know it you can see, but there is actually a 3/4" T connecting the chamber to the stock and gun.

PVC Arsenal 17 · Mon Sep 11, 2006 7:16 pm

woohoo that is the shizz

(did I just rhyme?)

noname · Mon Sep 11, 2006 8:15 pm

Yes, you did just rhyme, and after firing it, I too, agree with you; it is the shizz (I rhymed too YAY).

Check out my YouTube SpudGun Channel! · Mon Sep 11, 2006 10:40 pm

i couldnt see that tee in the pics,the pics have bad lighting and i was wondering how you tilted the chamber of to the side.

killagorrila99 · Tue Sep 12, 2006 12:32 am

yeah im just saying that on a sniper a piston is more difficult and limits your design

No It Doesent! If you make a barrel sealing valve in a tee you can make a design like this:

Stealth Sniper

Donating Members