Show us your pneumatic spud gun!  Discuss pneumatic (compressed gas) powered potato guns and related accessories.  Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
			
	        
			
	        
			
	        
			
		
		
			- 
				
																			 Aaroneous
- Private
  
 
- Posts: 4
- Joined: Thu Mar 24, 2022 12:01 pm
- Has thanked: 1 time
- Been thanked: 4 times
						
						
													
							
						
									 
								 Tue Mar 29, 2022 6:21 am
			
			
			
			
			farcticox1 wrote: ↑Fri Mar 25, 2022 7:33 pm
Is that ABS ? what psi do you run in it ?
 
Yes. Still working it out, but 100 was WAY too much... Would have cleared a six story building with room to spare.
... Home depot was out of pvc.
			
						 
		 
				
		
		 
	 
	        
			
		
		
			- 
				
								farcticox1				                
							
- Sergeant
  
- Posts: 1081
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
						
						
													
							
						
									 
								 Tue Mar 29, 2022 3:40 pm
			
			
			
			
			[/quote]
Yes. Still working it out, but 100 was WAY too much... Would have cleared a six story building with room to spare.
... Home depot was out of pvc.
[/quote]
Good job, PVC is not rated for gas pressure.
            
			
									
						
			
						 
		 
				
		
		 
	 
	        
			
	        
			
		
		
			- 
				
								farcticox1				                
							
- Sergeant
  
- Posts: 1081
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
						
						
													
							
						
									 
								 Wed Mar 30, 2022 6:29 pm
			
			
			
			
			Interesting that DWV which has no actual pressure rating is better at using for pressure applications than PVC which actually has a pressure rating but is not actually rated for gas pressure.  

			
						 
		 
				
		
		 
	 
	        
			
		
		
			- 
				
								Anatine Duo				                
							
- Specialist
  
 
- Posts: 189
- Joined: Sat Feb 01, 2014 11:16 am
- Location: cottage country
- Has thanked: 40 times
- Been thanked: 20 times
						
						
													
							
						
									 
								 Sat Apr 02, 2022 7:46 pm
			
			
			
			
			More important for me is the failure mode.  PVC makes sharp shrapnel, most ABS yawns or makes squared off pieces.