Mega Hybrid
-
- Recruit
- Posts: 1
- Joined: Wed Nov 16, 2005 6:24 pm
Hi all.
I'm new here as you can see, but that does not mean I'm new to spud gunning.
I am currently gathering parts for a huge hybrid and almost ready for constuction. Here are the parts I have:
2 foot long sch 80 8 inch steel pipe (chamber)
8 foot long steel pop can barrel (seriously, pop cans fit perfectly)
8hp gas motor
1/2 inch thick steel plate
misc. pipe fittings
I plan to cut six to eight holes in the steel plate via blowtoch, so the plate can be bolted to the chamber. Pieces of angle iron will be welded to the side of the chamber for the nut to hold on. Thy reason why I don't just weld the plate to the chamber is there is no way I can get an airtight weld. with the plates as endcaps I will then proceed to the barrel. The barrel will be on a hinge for easy burst disk placement. It will have a bolt to secure it in place for firing. I will have a standard propane meter mounte on the side. With the basics done I will move on to the hard part, the motor. The motor will be for turning an old air compressor piston mounted right on the gun. I am hoping that i will be able to get up to 300 psi fuel- air mix with this setup. No more running to the air compressor for each shot.
I have one problem though, ignition
I cannot obtain a stungun where I live and want multiple sparks so a bbq ignitor won't work (i think)
I'm new here as you can see, but that does not mean I'm new to spud gunning.
I am currently gathering parts for a huge hybrid and almost ready for constuction. Here are the parts I have:
2 foot long sch 80 8 inch steel pipe (chamber)
8 foot long steel pop can barrel (seriously, pop cans fit perfectly)
8hp gas motor
1/2 inch thick steel plate
misc. pipe fittings
I plan to cut six to eight holes in the steel plate via blowtoch, so the plate can be bolted to the chamber. Pieces of angle iron will be welded to the side of the chamber for the nut to hold on. Thy reason why I don't just weld the plate to the chamber is there is no way I can get an airtight weld. with the plates as endcaps I will then proceed to the barrel. The barrel will be on a hinge for easy burst disk placement. It will have a bolt to secure it in place for firing. I will have a standard propane meter mounte on the side. With the basics done I will move on to the hard part, the motor. The motor will be for turning an old air compressor piston mounted right on the gun. I am hoping that i will be able to get up to 300 psi fuel- air mix with this setup. No more running to the air compressor for each shot.
I have one problem though, ignition
I cannot obtain a stungun where I live and want multiple sparks so a bbq ignitor won't work (i think)
- Attachments
-
- spudgun.JPG (7.86 KiB) Viewed 5131 times
Last edited by flamintennisball on Sun Oct 15, 2006 8:47 pm, edited 1 time in total.
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
who are u blowing is a better question?
i got connections with the modfia, watch who ur talkin to noob.
talk to me on AIM at iamthwalrus3
talk to me on AIM at iamthwalrus3
- BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
I belive you will need one with a blow force equil to 19psi (prostitutes per square inch)
Last edited by BC Pneumatics on Mon Oct 16, 2006 12:29 am, edited 1 time in total.
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
Haha, If I remeber right from welding class they should all have the same pressure granted you are using the correct mixture and torch tip.If using OxyAcet and a cutting tip instead of dual use it will cut up to around 4' thick material but hell I did't pay attention to that part.
Whoever appeals to the law against his fellow man is either a fool or a coward.
Whoever cannot take care of themself without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honor.
Whoever cannot take care of themself without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honor.
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
ur mom had the right mixture with my torch head last night
i got connections with the modfia, watch who ur talkin to noob.
talk to me on AIM at iamthwalrus3
talk to me on AIM at iamthwalrus3
- BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
I am slightly concerned that Mr. Ball cant make an air tight weld, and that Mr. SquisY is taking our posts seriously.
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
- Jolly Roger
- Specialist 2
- Posts: 210
- Joined: Fri Aug 25, 2006 4:20 am
flamintennisball wrote:I am hoping that i will be able to get up to 300 psi fuel- air mix with this setup.
What he saidJolly Roger wrote:uh dude do you mean you wish to take this up to a 20x mix?
A 300psi fuel-air mix, if it's not liquid is going to make a crater when you pull the trigger.
- willarddaniels
- Specialist 2
- Posts: 286
- Joined: Wed Jan 31, 2007 2:34 pm
- Location: Idaho
use an ignition coil instead of a stun gun.
You can't go up to 300 psi using propane. Propane liquifies at 125 psi, for higher mix ratios, see this thread 40X mix
EDIT: even sch 80 black iron may not be enough to withstand that rate of expansion and the resulting pressure spike.
You can't go up to 300 psi using propane. Propane liquifies at 125 psi, for higher mix ratios, see this thread 40X mix
EDIT: even sch 80 black iron may not be enough to withstand that rate of expansion and the resulting pressure spike.
Yeah, a mix that high will DDT in a spectacular way. (meaning everyone in a 1km radius dies)
I wonder how much deeper the ocean would be without sponges.
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com