C02 mixing with Air
I'm not exactly sure what you are talking about. Do you mean filling the pnumatic with Co2 then adding copressed air??
I wonder how much deeper the ocean would be without sponges.
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
Ahhh Why? Why wouldn't you just add Co2 by itself? Co2 at 70F(I think) is at about 800psi. Unless your cannon is steel etc you will need a reg, So why would you reg the Co2 to say 40psi then pump it up to 60psi with a bike pump? Why not just reg it to 100psi in the first place.
Yeah, I really don't understand what he's trying to say.
You use Co2 for portability, and air is used for its cheapness. Using both is stupid because then its both unportable AND expensieve.
You use Co2 for portability, and air is used for its cheapness. Using both is stupid because then its both unportable AND expensieve.
I wonder how much deeper the ocean would be without sponges.
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com
- BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
No, using both has its advantages, for the reason you already mentioned.
"air is used for its cheapness"
Conversely, CO2 is expensive. Lets say your cannon operates at 250psi, and your compressor only goes up to 125psi? It seems perfectly practical to me to supplement the compressed air with CO2 in order to get to 250psi in a more economical fashion.
And for all of you that are waiting to come back with "But you can buy a 250psi compressor for only $15!", I just want to point out that there are often times more than one way to skin a cat, and perhaps this person doesn't feel like waiting for a cheap compressor to fill up his chamber. He feels it is worth it to pay for the CO2 instead. To each his own.
No, to address the creator of this topic:
This is something I have planned to do in the past, but never got around to. It will work fine. You will also have a higher velocity than if CO2 alone was used. (Something else to consider before you call someone else stupid, Insomniac.)
"air is used for its cheapness"
Conversely, CO2 is expensive. Lets say your cannon operates at 250psi, and your compressor only goes up to 125psi? It seems perfectly practical to me to supplement the compressed air with CO2 in order to get to 250psi in a more economical fashion.
And for all of you that are waiting to come back with "But you can buy a 250psi compressor for only $15!", I just want to point out that there are often times more than one way to skin a cat, and perhaps this person doesn't feel like waiting for a cheap compressor to fill up his chamber. He feels it is worth it to pay for the CO2 instead. To each his own.
No, to address the creator of this topic:
This is something I have planned to do in the past, but never got around to. It will work fine. You will also have a higher velocity than if CO2 alone was used. (Something else to consider before you call someone else stupid, Insomniac.)
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
- BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
Your velocity will be better than CO2 alone, but lower than air alone (at the same pressures.)
The idea is, the lighter the gas, the higher the potential velocity.
The idea is, the lighter the gas, the higher the potential velocity.
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>