Burst Discs
Anyone have any ideas for burst discs other than aluminum foil? I've been testing a new mortar today, and aluminum foil is the only thing I can get to work, except it leaks and takes too long to make discs. I've tried milk jug plastic; that wouldn't fail, even at 120 psi, and when I popped it with a nail, it just let the air out slowly. I've also tried thin cardboard (leaky and wouldn't burst), paper (leaky, but did burst), and some other random crap.
I didn't try soda bottles because they're a bunch stronger than milk jugs, so what's the point?
I guess I could try remote firing it, because PVC will probably hold up better than milk jug plastic. Should I just hide somewhere and keep pumping til it blows?
I didn't try soda bottles because they're a bunch stronger than milk jugs, so what's the point?
I guess I could try remote firing it, because PVC will probably hold up better than milk jug plastic. Should I just hide somewhere and keep pumping til it blows?
I just soaked them for about 10 minutes in PVC primer and dried them. THey're about 1/2 as thick as before and more flexible. They seem a lot weaker, but 10:30 is a little late to test, seeing as it's so loud it makes my ears ring at 40 psi. I'm embarrassed to say that aluminum burst discs, at 80 psi, outperform my big piston cannonat 120 psi, even though the piston cannon has about 4 more times the chamber space. 

Wow!?
I would venture to guess that the both of you were not members of the former SGTC Forums? - Ha!
Making a burst-disc out of <a href="http://en.wikipedia.org/wiki/Polyethyle ... alate">PET (Polyethylene terephthalate)</a> is what I've always used in my hybrids and my burst-disc pneumatics. -The plastic will burst at 800-100psig.
The plastic milk jug plastic is made from HDPD (High Density Polyethylene) and will burst anywhere from 120-150 psig.
Your aluminum foil burst-discs will hold back about 15psig for each layer, but getting a good seal with a thickness past 4 layers is difficult, unless you tighten the living $@#% out of the union.

I would venture to guess that the both of you were not members of the former SGTC Forums? - Ha!
Making a burst-disc out of <a href="http://en.wikipedia.org/wiki/Polyethyle ... alate">PET (Polyethylene terephthalate)</a> is what I've always used in my hybrids and my burst-disc pneumatics. -The plastic will burst at 800-100psig.
The plastic milk jug plastic is made from HDPD (High Density Polyethylene) and will burst anywhere from 120-150 psig.
Your aluminum foil burst-discs will hold back about 15psig for each layer, but getting a good seal with a thickness past 4 layers is difficult, unless you tighten the living $@#% out of the union.
DR's back!
Actually we were both members, I was for about a year, but didn't post much. I didn't really stick my head in much unless I wanted more opinions on designs or my cannons.
I would use PET except I don't have any right now and it's too hard to make enough of them. Yesterday I sat down and made 35 milk jug discs, so now I need a use for them. I would make a hybrid, but my parents won't even let me get into combustions.
As for aluminum burst discs, you are 100% correct, but you also forgot it uses loads of aluminum foil and the discs are annoying got make.
Actually we were both members, I was for about a year, but didn't post much. I didn't really stick my head in much unless I wanted more opinions on designs or my cannons.
I would use PET except I don't have any right now and it's too hard to make enough of them. Yesterday I sat down and made 35 milk jug discs, so now I need a use for them. I would make a hybrid, but my parents won't even let me get into combustions.
As for aluminum burst discs, you are 100% correct, but you also forgot it uses loads of aluminum foil and the discs are annoying got make.
-
- Specialist 2
- Posts: 283
- Joined: Wed Jan 03, 2007 8:59 pm
noname was but didnt come that often and was mostly there for the bbmgs and ive heard that aluuminum from pop cans works good its what sqort uses in his burst disk cannonDR wrote: I would venture to guess that the both of you were not members of the former SGTC Forums? - Ha!
- Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
Inner tube rubber
Playing cards
milk jugs scored with a razor blade
AOL cds
thin plexiglass/sheet pvc
beer cans (Edit: already mentioned)
No idea what will work and what won't, because Ive never done any tests. Im just trying to throw suggestions out.
Playing cards
milk jugs scored with a razor blade
AOL cds
thin plexiglass/sheet pvc
beer cans (Edit: already mentioned)
No idea what will work and what won't, because Ive never done any tests. Im just trying to throw suggestions out.
I might be able to try inner tube rubber, and playing cards, I'll also try scored milk jugs. Beer cans, nope. If the regular milk jug didn't fail, why would the thicker metal? Thin sheet PVC, I could probably try that, but I'd be showering the nearby houses (and me!) with tiny shards. Not fun. I'll test in about an hour.
- frankrede
- Sergeant Major 2
- Posts: 3220
- Joined: Thu Jul 20, 2006 9:47 pm
- Has thanked: 1 time
- Been thanked: 1 time
Soda can aluminum sucks, they burst at less than 50 psi for me.Has any tried sheet aluminum or metal?You can get it in almost any size and is cheap
Last edited by frankrede on Sun Apr 15, 2007 11:41 am, edited 1 time in total.
Current project: Afghanistan deployment
Inner tube rubber will burst @ ~15psignoname wrote:I might be able to try inner tube rubber, and playing cards, I'll also try scored milk jugs. Beer cans, nope. If the regular milk jug didn't fail, why would the thicker metal? Thin sheet PVC, I could probably try that, but I'd be showering the nearby houses (and me!) with tiny shards. Not fun. I'll test in about an hour.
Playing Cards are good for a combustion, but will not hold a significant amount of pressure in a pneumatic
Scored milk jugs? - what happened to the "annoying to make" mentality?
Rene Caldera designed and built the original NO2 powered hybrid rockets in the late 90's. I was lucky enough to buy his plans, before he discontinued them. How this ties in, is Rene's design uses PET (soda pop) bottle burst disks to hold back the pressure of whip cream cartridges.
I've never had a failure with them, and they're easy to obtain and make.
I've never had a failure with them, and they're easy to obtain and make.
Are you talking about this? :tercero wrote:Rene Caldera designed and built the original NO2 powered hybrid rockets in the late 90's. I was lucky enough to buy his plans, before he discontinued them. How this ties in, is Rene's design uses PET (soda pop) bottle burst disks to hold back the pressure of whip cream cartridges.
I've never had a failure with them, and they're easy to obtain and make.

My curiosity is up, so I think I'll check out the site, for any info.

<a href="http://qwksite.com/rlmac/rene/microhybr ... ohybrid</a>