little piston-in-tee gun
- TwitchTheAussie
- Corporal 5
- Posts: 980
- Joined: Tue Feb 06, 2007 3:23 am
BB's rocks, nail darts 

Raise your horns if you love metal.
CpTn_lAw
-spudgunning is like sex, once you've tasted, you can't wait til next time.
CpTn_lAw
- Pyro Ninja
- Specialist 3
- Posts: 351
- Joined: Mon Oct 09, 2006 7:11 am
- Location: Australia
Sorry about this but how do you connect the 1.25'' female x slip adapter to the Tee, Is there just a bit of 1.25'' pipe between the them
yes, thats exactly right, just about 3'' of 1.25'' pipe and glue it together.Pyro Ninja wrote:Sorry about this but how do you connect the 1.25'' female x slip adapter to the Tee, Is there just a bit of 1.25'' pipe between the them
EDIT- why, are you making one? if you do be sure to post it.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
- Pyro Ninja
- Specialist 3
- Posts: 351
- Joined: Mon Oct 09, 2006 7:11 am
- Location: Australia
Cool, thanks heaps........I will be sure to post it if i make one..... 

the only thing that i can suggest is that you install a bumper, i have a different valve on a larger cannon explode today because it didnt have a bumper.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
Nice valve!
Just to let you know, if you sand the raised lines and writing off the 3/4" female adapter it fits exactly into a 1-1/4" x 1" flush bushing. Sanding/dremeling the stop in the bushing will allow you to insert and glue the adapter all the way into it, to make the whole valve much more compact. Maybe try it on the next one...
Just to let you know, if you sand the raised lines and writing off the 3/4" female adapter it fits exactly into a 1-1/4" x 1" flush bushing. Sanding/dremeling the stop in the bushing will allow you to insert and glue the adapter all the way into it, to make the whole valve much more compact. Maybe try it on the next one...
ohh, thats a great idea, i was tring to figure out how to make it smaller. thanks alot, i think i may make a new one.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
i know this is starting to be a kinda old topic, but i think its worth sharing.
my brother recently got a paintball gun, so i asked if i could shoot a couple paintballs out of my cannon and he said ok. i took about 10 paintballs and shot them. at about 130 psi, 3 out of the 10 poped in the barrel. i guess it was the pressure. they are only made to be shot at 300 or 400 fps, and i was shooing it at a much higher rate, i was just wondering if anyone else had the problem of paintballs poping in the barrel.
edit- these paintballs that poped had already been shot at a hay bail, but showed no damage. im sure they were weakened a little, but i am still wondering if this has happended to any one else before.
my brother recently got a paintball gun, so i asked if i could shoot a couple paintballs out of my cannon and he said ok. i took about 10 paintballs and shot them. at about 130 psi, 3 out of the 10 poped in the barrel. i guess it was the pressure. they are only made to be shot at 300 or 400 fps, and i was shooing it at a much higher rate, i was just wondering if anyone else had the problem of paintballs poping in the barrel.
edit- these paintballs that poped had already been shot at a hay bail, but showed no damage. im sure they were weakened a little, but i am still wondering if this has happended to any one else before.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"