Dissasembling a bullet
- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
I have a few freinds who hunt and they use handguns and what not, They gave me some bullets but I don't have a gun. So I pretty much want the gun powder. Can I use plyers to disaseble the bullet?
-
- Specialist 2
- Posts: 283
- Joined: Wed Jan 03, 2007 8:59 pm
yes very carefully pull the bullet from the cartridge then pour out the powder
- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
Will I need to use sufficient force or will it be sorta easy?Kenny_McCormic wrote:yes very carefully pull the bullet from the cartridge then pour out the powder
- Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
It depends on the bullet.
What type of bullets are we talking about? 9mm, .22shorts?
Unless you have a lot of bullets/time I wouldnt think it would be worth it.
Obviously, keep the slug facing away from you when you pull it out.
If a .22 round explodes on you, it probably won't be lethal, but it will at least puncture your skin.
What type of bullets are we talking about? 9mm, .22shorts?
Unless you have a lot of bullets/time I wouldnt think it would be worth it.
Obviously, keep the slug facing away from you when you pull it out.
If a .22 round explodes on you, it probably won't be lethal, but it will at least puncture your skin.

- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
Lol, Well I am not sure with this bullet talk but they are very very very small like as thin as a bic pen and probably like an inch._Fnord wrote:It depends on the bullet.
What type of bullets are we talking about? 9mm, .22shorts?
Unless you have a lot of bullets/time I wouldnt think it would be worth it.
Obviously, keep the slug facing away from you when you pull it out.
If a .22 round explodes on you, it probably won't be lethal, but it will at least puncture your skin.
- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
Not sure, but lets pretend they do_Fnord wrote:Do the say LR on the bottom?

-
- Corporal 2
- Posts: 675
- Joined: Thu Feb 15, 2007 9:20 pm
First off, what state do you live in?Second,check the laws.
Most of the time you can walk into a sporting goods store and buy the powder.Or get it off the internet.But don't disassemble a bullet.For the powder you get it's not worth it.If you want either the bullet or powder just order the stuff off a reloading website.
Most of the time you can walk into a sporting goods store and buy the powder.Or get it off the internet.But don't disassemble a bullet.For the powder you get it's not worth it.If you want either the bullet or powder just order the stuff off a reloading website.
-
- Corporal 2
- Posts: 675
- Joined: Thu Feb 15, 2007 9:20 pm
If you take Shownomercy's advice make sure it's in a gun first.
Dang man[to snm(gotta love acronyms)],if trying to take apart a bullet and being a complete novice isn't bad enough.You've already got him trying to blow himself up.Dang you are sadistic.And I think its kinda funny in a morbid way.
Bottom line don't tap on the primer,unless of course you feel like picking brass out of yourself.
Dang man[to snm(gotta love acronyms)],if trying to take apart a bullet and being a complete novice isn't bad enough.You've already got him trying to blow himself up.Dang you are sadistic.And I think its kinda funny in a morbid way.

Bottom line don't tap on the primer,unless of course you feel like picking brass out of yourself.
- ShowNoMercy
- Sergeant
- Posts: 1094
- Joined: Mon Mar 19, 2007 8:08 am
- Location: Jersey Bitches!
I try to spread my pessimissim. And besides if your dumb enough to listen to me then you shouldnt be messing around with this stuff.
Jesus saves, no need to pray
The gates of pearl have turned to gold
It seems you've lost your way
The gates of pearl have turned to gold
It seems you've lost your way
-
- Corporal 2
- Posts: 675
- Joined: Thu Feb 15, 2007 9:20 pm
Well to be perfectly pessimistic. Are you saying now that you are not credible source of information.If so should the mods ban you
I'm just messing around.But you have a good point.Whenever using explosives of some kind you should take time to read up on the subject.Or get help from an experienced friend.

I'm just messing around.But you have a good point.Whenever using explosives of some kind you should take time to read up on the subject.Or get help from an experienced friend.
- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
goathunter wrote:First off, what state do you live in?Second,check the laws.
Most of the time you can walk into a sporting goods store and buy the powder.Or get it off the internet.But don't disassemble a bullet.For the powder you get it's not worth it.If you want either the bullet or powder just order the stuff off a reloading website.
PA. And yeah I thought about it and am still looking into buying it on internet. but I wanted to test some of this stuff.
- spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
counterstrike...i live in pa..i go into ammo and arms (local sporting goods store) and buy my gun powder all the time..but u have to be 18 so my dad comes
.. and are u experienced with this kind of stuff? i would research a ittle before buying gp..its like 18 dollars for one can if u didnt know and 1 can isnt alot.. do not buy it off the internet jsut go to a sporting goods or ammo store near you. oh and waht are u doing with it? if u plan on making explosives 3f gunpowder is the best for that..[/u]

4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
Yeah , I know about that stuff but I don't want to waste my money instead I want to take some from my freinds. Is there a possiblity it will just blow up?
- jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
It won't detonate unless you strike the primer at the bottom. A pair of pliers, a vice and some cojones should suffice.
don't expect the powder to explode with a bang if you burn it in the open, it needs to be very tightly compressed to cause an explosion.
don't expect the powder to explode with a bang if you burn it in the open, it needs to be very tightly compressed to cause an explosion.
hectmarr wrote:You have to make many weapons, because this field is long and short life